24LC64XT-ESLASHMF datasheet(12/51 Pages) MICROCHIP

12 / 51 page

24AA64/24FC64/24LC64

DS20001189U-page 12

 1997-2022 Microchip Technology Inc. and its subsidiaries

7.0

ACKNOWLEDGE POLLING

Since the device will not acknowledge during a write

cycle, this can be used to determine when the cycle is

complete (this feature can be used to maximize bus

throughput). Once the Stop condition for a write

command has been issued from the host, the device

initiates the internally-timed write cycle and ACK polling

can then be initiated immediately. This involves the

host sending a Start condition followed by the control

byte for a write command (R/W = 0). If the device is still

busy with the write cycle, then no ACK will be returned.

If no ACK is returned, the Start bit and control byte must

be resent. If the cycle is complete, the device will return

the ACK and the host can then proceed with the next

read or write operation. See Figure 7-1 for a flow

diagram of this operation.

FIGURE 7-1:

ACKNOWLEDGE POLLING

FLOW

Send

Write Command

Send Stop

Condition to

Initiate Write Cycle

Send Start

Send Control Byte

with R/W = 0

Did Device

Acknowledge

(ACK = 0)?

Operation

Yes

24LC64XT-E/MF 数据表(PDF) 12 Page - Microchip Technology

24LC64XT-E/MF 数据表(HTML) 12 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51

数据表下载