2201813 datasheet(21/27 Pages) PHOENIX

21 / 27 page

ME-IO 18,8...

105787_en_02

PHOENIX CONTACT

21 / 27

Mounting the housing

9.1

Assembling the Lock and Release system

When the PCB is completely assembled, the orange Lock

and Release system, included in the scope of delivery of the

lower housing part, has to be assembled.

To do this, proceed as follows:

•

Solder the header onto the PCB.

Figure 41

Attaching the Lock and Release system

•

Attach the orange Lock and Release system onto the

header. The recesses of the Lock and Release system

have to fit over the protruding guide pins of the header.

Press the Lock and Release system against the header.

Figure 42

Attaching the spring

•

Attach the spring which is included in the scope of de-

livery. The spring is inserted at one of the possible posi-

tions.

9.2

Inserting the PCB

Figure 43

Inserting the PCB

•

Insert the PCB into the guide slot of the housing and

push it downwards until it audibly snaps in.

Pay attention to the positioning of the connectors

and the headers (see page 6).

2201813 数据表(PDF) 21 Page - PHOENIX CONTACT

2201813 数据表(HTML) 21 Page - PHOENIX CONTACT

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

数据表下载