SiP32101

www.vishay.com

Vishay Siliconix

Revision: 13-Mar-14

3

Document Number: 62935

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

Enable Slew Rate Power Up

The following fig. 3 shows the typical enable slew rate power

up for the rise time measurement of the device. The rise time

of the device can be measured by toggling the EN pin with

the signal source and measuring the output rise time with

oscilloscope.

Fig. 3

SIP32101 EVALUATION BOARD SCHEMATIC

Fig. 4