| 数据搜索系统,热门电子元器件搜索 |
|
LPC1102 数据表(PDF) 12 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
LPC1102 数据表(HTML) 12 Page - NXP Semiconductors |
|
12 / 43 page ![]() LPC1102_1104 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2013. All rights reserved. Product data sheet Rev. 7 — 26 September 2013 12 of 43 NXP Semiconductors LPC1102/1104 32-bit ARM Cortex-M0 microcontroller • Input multiplexing among 5 pins. • Power-down mode. • Measurement range 0 V to VDD. • 10-bit conversion time 2.44 s (up to 400 kSamples/s). • Burst conversion mode for single or multiple inputs. • Optional conversion on transition of input pin or timer match signal. • Individual result registers for each ADC channel to reduce interrupt overhead. 7.11 General purpose external event counter/timers The LPC1102/1104 include two 32-bit counter/timers and two 16-bit counter/timers. The counter/timer is designed to count cycles of the system derived clock. It can optionally generate interrupts or perform other actions at specified timer values, based on four match registers. Each counter/timer also includes one capture input to trap the timer value when an input signal transitions, optionally generating an interrupt. 7.11.1 Features • A 32-bit/16-bit timer/counter with a programmable 32-bit/16-bit prescaler. • Counter or timer operation. • One capture channel that can take a snapshot of the timer value when an input signal transitions. A capture event may also generate an interrupt. • Four match registers per timer that allow: – Continuous operation with optional interrupt generation on match. – Stop timer on match with optional interrupt generation. – Reset timer on match with optional interrupt generation. • Up to four external outputs corresponding to match registers, with the following capabilities: – Set LOW on match. – Set HIGH on match. – Toggle on match. – Do nothing on match. 7.12 System tick timer The ARM Cortex-M0 includes a system tick timer (SYSTICK) that is intended to generate a dedicated SYSTICK exception at a fixed time interval (typically 10 ms). 7.13 Windowed WatchDog Timer The purpose of the watchdog is to reset the controller if software fails to periodically service it within a programmable time window. 7.13.1 Features • Internally resets chip if not periodically reloaded during the programmable time-out period. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |