2201493 datasheet(21/30 Pages) PHOENIX

21 / 30 page

ME PLC 40...

105504_en_01

PHOENIX CONTACT

6.2

Bus connector 10/10

6.2.1

Overview of the set 10/10

Figure 30

Overview of the set 10/10

6.2.2

Mounting

•

Solder the plug-in connectors A1, A2, and B1 onto your

PCB.

•

Solder the two metal terminals onto your PCB.

•

Insert the PCB.

•

Put the top and bottom parts together.

•

Solder the plug-in connector B2 to the PCB of the hous-

ing base ME PLC 40 B BUS 10/10 GY7035, 2201500.

6.2.3

Coding

You have the option to codify the bus connector and the

housing. This should prevent a housing being accidentally

plugged onto the wrong bus connector.

Figure 31

Coding option

Coding sets in rectangular and drop form are available (see

“Ordering data” on page 3).

•

Plug one part of the coding set into the opening of the

bus connector.

•

The counter-part goes into the housing.

Bus connector kit consisting of 2 x 10-pos. plug-in connec-

tors, plastic upper part and base, plus metal clamp for mount-

ing the DIN rail, PCB not included

ME PLC 40 BUS 10/10 KIT BK

2201503

Observe the proper orientation of the PCB when

inserting it into the housing. The housing base

has raised supports on one side. The PCB side

with the cut-out belongs on this side.

2201493 数据表(PDF) 21 Page - PHOENIX CONTACT

2201493 数据表(HTML) 21 Page - PHOENIX CONTACT

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

数据表下载