Data Sheet

ADL8142S

ABSOLUTE MAXIMUM RATINGS

analog.com

Rev. 0 | 5 of 8

Table 5.

Parameter

Rating

4.5 V

RF Input Power (RFIN)

20 dBm

Pulsed RFIN (Duty Cycle = 10%, Pulse Width = 100 μs)

22 dBm

5.99 mW/°C Above 85°C)

0.54 W

Temperature

Storage Range

−65°C to +150°C

Operating Range

−40°C to +85°C

93.4°C

Maximum Junction

175°C

Stresses at or above those listed under Absolute Maximum Ratings

may cause permanent damage to the product. This is a stress

rating only; functional operation of the product at these or any other

conditions above those indicated in the operational section of this

specification is not implied. Operation beyond the maximum operat-

ing conditions for extended periods may affect product reliability.

THERMAL RESISTANCE

Thermal performance is directly linked to printed circuit board

(PCB) design and operating environment. Close attention to PCB

thermal design is required.

Table 6. Thermal Resistance

Package Type

Unit

CP-8-30

134.3

°C/W

167

°C/W

OUTGAS TESTING

The criteria used for the acceptance and rejection of materials must

be determined by the user and based upon specific component and

system requirements. Historically, a total mass loss (TML) of 1.00%

and collected volatile condensable material (CVCM) of 0.10% have

been used as screening levels for rejection of spacecraft materials.

Table 7. Outgas Testing

Specification (Tested per ASTM E595 -15)

Value

Unit

Total Mass Lost

0.14

%

Collected Volatile Condensable Material

0.01

%

Water Vapor Recovered

0.03

%

ELECTROSTATIC DISCHARGE (ESD) RATINGS

The following ESD information is provided for handling of ESD-sen-

sitive devices in an ESD protected area only.

Human body model (HBM) per ANSI/ESDA/JEDEC JS-001.

ESD Ratings for ADL8142S-CSL

Table 8. ADL8142S-CSL, 8-Lead LFCSP

ESD Model

Withstand Threshold (V)

Class

HBM

±250

1A

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Charged devi-

ces and circuit boards can discharge without detection. Although

this product features patented or proprietary protection circuitry,

damage may occur on devices subjected to high energy ESD.

Therefore, proper ESD precautions should be taken to avoid

performance degradation or loss of functionality.