Features

•

Universal input mains range: 90 Vac to 265 Vac - Frequency 47 ÷ 63 Hz

•

Maximum output power: 65 W

•

Dimensions: 58x32x20 mm, (L x W x H)

•

•

Efficiency: > 93 % @ full load

•

Constant current output: 3.75 A max

•

Output voltage range: 3.3 ÷ 21 Vdc

•

PD output:

–

Five fixed PDOs: 5 V@3.75 A, 9 V@3.75 A, 12 V@3.75 A, 15 V@3.75 A,

20 V@3.25 A

–

Two APDOs (PPS): 3.3 V÷16 V@3.75 A, 3.3 V÷21 V@3.25 A

•

PPS mode: 20 mV step for CV, 50 mA step for CC

•

Certified USB power delivery 3.1.1.2 power brick

•

Feedback loops: constant current and constant voltage

•

Protections: brown out, over current protection, over temperature protection,

over voltage protection, under voltage protection

Description

The EVLONE65W is a high power density USB-PD board supporting Programmable

Power Supply (PPS). The design supports wide range input voltage and can deliver

five fixed PDOs and two APDOs.

This board is based on ST-ONE, the world’s first digital controller embedding an

Arm® Cortex® M0+ core, an offline programmable controller with synchronous

rectification, and USB-PD PHY in a single package.

Such a system is specifically designed to control ZVS non-complementary active

clamp flyback converters to create high power density chargers and adapters with

USB-PD interface. The device includes an active clamp flyback controller and its

HV startup on the primary side, a microcontroller and all the peripherals required

to control the conversion and the USB-PD communication on the secondary side.

The two sides are connected through an embedded galvanically isolated dual

communication channel.

High switching operation in companion with a MasterGaN power stage allows use of

small size magnetic components while reaching a very high efficiency.

Product status link

EVLONE65W

Very high power density board - 65W USB Type-C™ Power Delivery

EVLONE65W

Data brief

DB4736 - Rev 1 - May 2022

For further information contact your local STMicroelectronics sales office.

www.st.com