Embedded Power for

Business-Critical Continuity

Rev. 1.30.06

iMP Series

5of 8

Notes

1. Input: Barrier type. Three No. 6-32 B.H. screws (0.375” centers). Max torque: 6 in-lbs. (0.67 N-m).

2. Control connectors: (J1) 10 position housing, gold plated contacts. Mates with Molex 90142-0010 housing with 90119-2110 crimp contacts (Molex C -

Grid III Series) or AMP Model number 87977-3 with 87309-8 pins. Connector kit includes mating connector and 10 pins,

Astec part #70-841-004. J2 10 position housing (Landwin 2051P1000T). Mates with housing 205051000 (Landwin) with 2053T011P (Landwin) pins.

3. Chassis material: aluminum with chemical film coating (conductive).

4. All dimensions are in millimeters and inches, and are typical.

5. Customer mounting -3 sides M4, bottom also includes 8-32 mounting holes. Max. penetration is 0.150” (3.8mm). Max. torque: 5in-lbs.

6. Output module connections: All single O/P modules are M4 x 8mm screws. Max. torque: 10in-lbs.

Dual O/P module is M3 x 8mm screws. Max. torque: 5 in-lbs.

Triple O/P module is .045” square pins on .156” centers. Mates with Molex 09-50-8063 or equivalent.

i

MP Series

i

MP4 (750/1100 Watts Max)

5

5--IIn

ncch

h C

Ca

asse

e S

Siizze

e:: iMP4: 2.5” x 5” x 10” (63.5mm x 127mm x 254mm)

W

We

eiig

gh

htt:: iMP4 Case: 2.6 lbs. • 36 W Triple: 0.5 lb. 210 W Single: 0.6 lb.

• 360 W Single 1.0 lb. • 600 W Single: 2.0 lbs. 144 W Dual: 0.6 lb.

Horizontal both sides