1

Ultra-compact Pre-wired Photomicrosensor (Non-modulated)

EE-SX95

Meeting Customer Needs with

Ultra-compact Sensors that Mount

with M3 Screws

• Mount using M3 or M2 screws.

• Reliable sensing slot depth of 6.5 mm.

• Indication of sensing window for easy confirmation of

insertion depth.

• Bright indicator for confirmation from many directions.

• Both light-ON and dark-ON outputs provided.

• All models available with either standard cable or

flexible robot cable.

• Load short-circuit protection circuit provided.

Features

Mount Using M2 or M3 Screws

The EE-SX95 can be mounted using M2 or M3 screws, so it can

easily replace an existing Sensor mounted with M2 screws.

Indication of Sensing Window for Easy

Confirmation of Insertion Depth

The location of the sensing window is indicated on the insertion slot

so that you can visually confirm whether the sensing object covers the

sensing window and easily check the insertion depth.

Reliable Best-in-Class Sensing Slot

Depth of 6.5 mm

(Based on April 2013 OMRON investigation.)

A deeper slot helps prevent the sensing object from coming into

contact with the base of the slot, creating greater tolerance in

mechanism design.

Bright Indicator for Confirmation from Many

Directions

The bright light indicator can be checked from up to four directions to

enable flexible selection of the installation location.

Refer to the Safety Precautions on

page 5.

For the most recent information on models that have been certified for

safety standards, refer to your OMRON website.

Example for the EE-SX950-W

Installation with M2 screws: 18.0

Installation with M3 screws: 18.7

The sensing object just needs

to extend below this line.

6.5mm