Features

•

High voltage rail up to 1200 V

•

Driver current capability: 4 A sink/source @25°C

•

dV/dt transient immunity ±100 V/ns in full temperature range

•

Overall input-output propagation delay: 75 ns

•

Separate sink and source option for easy gate driving configuration

•

4 A Miller CLAMP dedicated pin option

•

UVLO function

•

Gate driving voltage up to 26 V

•

3.3 V, 5 V TTL/CMOS inputs with hysteresis

•

Temperature shut-down protection

•

Standby function

•

6 kV galvanic isolation

•

UL 1577 recognized

•

Wide body SO-8W package

Application

•

Motor driver for home appliances, factory automation, industrial drives and fans.

•

600/1200 V inverters

•

Battery chargers

•

Induction heating

•

Welding

•

UPS

•

Power supply units

•

DC-DC converters

•

Power Factor Correction

Description

The STGAP2HS is a single gate driver which provides galvanic isolation between the

gate driving channel and the low voltage control and interface circuitry.

The gate driver is characterized by 4 A capability and rail-to-rail outputs, making the

device also suitable for mid and high power applications such as power conversion

and motor driver inverters in industrial applications. The device is available in

two different configurations. The configuration with separated output pins allows

to independently optimize turn-on and turn-off by using dedicated gate resistors.

The configuration featuring single output pin and Miller CLAMP function prevents

gate spikes during fast commutations in half-bridge topologies. Both configurations

provide high flexibility and bill of material reduction for external components.

The device integrates UVLO and thermal shutdown protection functions to facilitate

the design of highly reliable systems. Dual input pins allow the selection of signal

polarity control and implementation of HW interlocking protection to avoid cross-

conduction in case of controller malfunction. The input to output propagation delay

is less than 75 ns, which delivers high PWM control accuracy. A standby mode is

available to reduce idle power consumption.

Product status link

STGAP2HS

Product label

Galvanically isolated 4 A single gate driver

STGAP2HS

Datasheet

DS13393 - Rev 5 - September 2022

For further information contact your local STMicroelectronics sales office.

www.st.com