265

検

　

出

1. Temperature measurement: Thermocouple φ 0.1 to 0.2 CA（K）or CC（T）at solder joints

　（copper foil surface）.

A heat resistive tape should be used to fix thermocouple.

2. Temperature profile

Available for Surface Mount Type.

180

150

260˚C max. 3 sec max.

230˚C

Time

120 sec max.

（pre-heating）

3 to 4min.

Time inside soldering equipment

Temperature (˚C )

40s max.

2. Switch terminals and a PC board should not be coated with flux prior to soldering.

3. The second soldering should be done after the switch is stable with normal temperature.

4. Use the flux with a specific gravity of min 0.81.

（EC-19S-8 by TAMURA Corporation, or equivalents.）

Notes

1. The above temperature shall be measured of the top of switch. There are cases where the PC board's temperature greatly

differs from that of the switch, depending on the material, size, thickness of PC boards and others.

　 The above-stated conditions shall also apply to switch surface temperatures.

2. Soldering conditions differ depending on reflow soldering machines.

Prior verification of soldering condition is highly recommended.

Notes

Available for Snap-in Type and Radial Type.

Items

Condition

Flux built-up

Mounting surface should not be exposed to flux

Preheating time

60s　max.

Soldering temperature

260℃ max.

Duration of immersion

5s max.

Number of soldering

2times max.

SKHH, SKPD Series

Items

Condition

Flux built-up

Mounting surface should not be exposed to flux

Preheating time

60s　max.

Soldering temperature

260℃ max.

Duration of immersion

5s max.

Number of soldering

2times max.

SKQJ, SKQK, SKEG Series

Items

Condition

Flux built-up

Mounting surface should not be exposed to flux

Preheating time

45s　max.

Soldering temperature

255℃ max.

Duration of immersion

5s max.

Number of soldering

2times max.

Items

Condition

Soldering temperature

350℃ max.

Duration of soldering

3s max.

Capacity of soldering iron

60W max.

SKHH, SKHW, SKRG, SKPD Series

Items

Condition

Soldering temperature

360℃ max.

Duration of soldering

3s max.

Capacity of soldering iron

60W max.

SKTD, SKTG, SKQJ, SKQK, SKEG Series

Items

Condition

Soldering temperature

350℃ max.

Duration of soldering

3s max.

Capacity of soldering iron

20W max.