FEATURES

Plastic package has Underwriters Laboratory

Flammability Classification 94V-O

Glass passivated junction

3000W Peak Pulse Power capability on 10/1000µs waveform

Excellent clamping capability

Repetition rate (duty cycle):0.05%

Low incremental surge resistance

Fast response time: typically less than 1.0ps from 0 Volts to V(BR)

Typical IR less than 1mA above 10V

High temperature soldering guaranteed: 265°C/10 seconds/.375"

,(9.5mm) lead length, 5lbs., (2.3kg) tension

MECHANICAL DATA

Case: Molded plastic over glass passivated junction

Terminal: Plated Axial leads, solderable per MIL-STD-750, Method 2026

Polarity: Color band denotes positive end (cathode) except Bipolar

Mounting Position : Any

Weight: 0.07ounce, 2.1gram

SYMBOL VALUE

UNITS

Minimum

3000

Watts

SEE

TABLE 1

Amps

8

Watts

-55 to +

175

Notes :

per Fig. 2 .

2.Mounted on Copper Pad area of 1.6×1.6" (40×40mm) per Fig. 5.

3.8.3ms single half sine-wave , or equivalent square wave, Duty cycle = 4 pulses per minutes maximum.

RATING

Peak Pulse Power Dissipation on 10/1000

s waveform (Note 1,FIG.1)

Peak Pulse Current of on 10/1000

s waveform (Note 1,FIG.3)

DEVICES FOR BIPOLAR APPLICATION

MAXIMUM RATINGS AND CHARACTERISTICS

Ratings at 25

ambient temperature unless otherwise specified.

Electrical characteristics apply in both directions

For Bidirectional use C or CA Suffix for types 3KP5.0 thru types 3KP180 (e.g. 3KP5.0C , 3KP180CA)

3KP SERIES

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE-5.0 TO 180 Volts

3000 watt Peak Pulse Power

Amps

, Lead lengths.375",(9.5mm) (Note 2)

Superimposed on Rated Load,(JEDEC Method) (Note 3)

Operating junction and Storage Temperature Range

400

Peak Forward Surge Current,8.3ms Single Half Sine-Wave

DB LECTRO Inc.

DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714