 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
IPS2050H 数据表(PDF) 1 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
IPS2050H 数据表(HTML) 1 Page - STMicroelectronics |
|
|
1 / 32 page  Features • 8 V to 60 V operating supply voltage range • Operating output current: 2.4 A (IPS2050H/HQ) or 5.6 A (IPS2050H-32/HQ-32) per channel • Smart driving of capacitive load • Fast demagnetization of inductive loads • Under-voltage lock-out • VCC over-voltage protection • Per-channel overload and over-temperature protection • Case over-temperature protection • Ground disconnection protection • Per channel overload/over-temperature event diagnostic pins • Designed to meet IEC 61000-4-2, IEC 61000-4-4, IEC 61000-4-5 • Packages: PowerSSO-24 and QFN48L 8x6x0.9 mm Applications • Programmable logic control • Vending machines • Industrial PC peripheral input/output • Numerical control machines • General high-side switch applications Description The IPS2050H/HQ and IPS2050H-32/HQ-32 are dual high-side switch ICs able to drive capacitive, resistive or inductive loads with one side connected to ground. The very low RDS-ON (≤ 50 mΩ up to TJ = 125 °C) makes the IC suitable for applications with up to 2.4 A (IPS2050H/HQ) or 5.6 A (IPS2050H-32/HQ-32) steady state operating current. Each output channel is independently protected against junction over-temperature events by a junction temperature sensor, and a further temperature sensor is included to monitor case temperature, so an overheated output channel can only be turned back ON when the case temperature returns below the reset temperature. The embedded per-channel overload protection circuit monitors the output current and, on triggering of the activation threshold (IPK-X), starts modulating the impedance of the output switch to limit the output current to ILIM-X, for both IC and load protection. The IC offers two different sets of activation threshold and limitation levels (IPKH-X, ILIMH-X and IPKL-X, ILIML-X) for smart driving of capacitive loads (such as bulb lamps) and loads with initial peak current requirements. The IC diagnostics is based on two FAULT pins (current source), one for each channel. Each FAULT pin is activated by an overload or an over-temperature event on the related channel. Product status link IPS2050H IPS2050H-32 IPS2050HQ IPS2050HQ-32 Product label High efficiency, high-side switch with extended diagnostics and smart driving for capacitive loads IPS2050H, IPS2050H-32 IPS2050HQ, IPS2050HQ-32 DS13779 - Rev 3 - August 2022 For further information contact your local STMicroelectronics sales office. www.st.com |
类似零件编号 - IPS2050H |
|
类似说明 - IPS2050H |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
