LTE/LPWA Universal Broadband Embedded Automotive Antenna Specifications.

KYOCERA AVX produces a wide variety of standard and custom antennas to meet user needs.

© 2022 KYOCERA AVX

tel +(1) 858.550.3820

email: antenna.info@kyocera-avx.com

1 Avx Blvd, Fountain Inn, SC 29644

Recommended Reflow Soldering Profile

The recommended method for soldering the antenna to the board is forced convection reflow soldering. The following

suggestions provide information on how to optimize the reflow process for the FR4 antenna:

*Adjust the reflow duration to create good solder joints without raising the antenna temperature

beyond the allowed maximum of 260° C.

DATASHEET | Part No. AP822601

TDS-ANT-0097 | Rev 0