3

PS2011B

12/11/00

12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012

PI74FCT240T/241T/244T/540T/541T(25ohmSeries)

PI74FCT2240T/2241T/2244T/2541T

OctalBuffer/LineDrivers

Maximum Ratings

(Above which the useful life may be impaired. For user guidelines, not tested.)

Note:

Stresses greater than those listed under MAXIMUM

RATINGS may cause permanent damage to the

device. This is a stress rating only and functional

operation of the device at these or any other condi-

tions above those indicated in the operational

sections of this specification is not implied. Exposure

to absolute maximum rating conditions for extended

periods may affect reliability.

DC Electrical Characteristics (Over the Operating Range, TA = –40°C to +85°C, VCC = 5.0V ± 5%)

Parameters Description

s

Output HIGH Voltage

2.4

3.0

V

Output LOW Current

0.3

0.55

V

Output LOW Current

ΩSeries)

0.3

0.50

V

Input HIGH Voltage

Guaranteed Logic HIGH Level

2.0

V

Input LOW Voltage

Guaranteed Logic LOW Level

0.8

V

Input HIGH Current

1µA

Input LOW Current

–1

µA

High Impedance

1

µA

Output Current

–1

µA

Clamp Diode Voltage

–0.7

–1.2

V

Power Down Disable

—

—

100

µA

Short Circuit Current

–60

–120

mA

Input Hysteresis

200

mV

Description

Test Conditions

Typ

Max.

Units

Input Capacitance

6

10

pF

Output Capacitance

8

12

pF

Notes:

1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type.

2. Typical values are at Vcc = 5.0V, +

25°C ambient and maximum loading.

3. Not more than one output should be shorted at one time. Duration of the test should not exceed one second.

4. This parameter is determined by device characterization but is not production tested.

Storage Temperature ........................................................... –65

°C to +150°C

Ambient Temperature with Power Applied ........................... -40

°C to +85°C

Supply Voltage to Ground Potential (Inputs & Vcc Only) .... –0.5V to +7.0V

Supply Voltage to Ground Potential (Outputs & D/O Only) . –0.5V to +7.0V

DC Input Voltage .................................................................... –0.5V to +7.0V

DC Output Current ............................................................................... 120mA

Power Dissipation ................................................................................... 0.5W