8.2

Inner box labeling

The labeling follows the ST standard packing acceptance specification.

The following information is on the inner box label:

•

Assembly site

•

Sales type

•

Quantity

•

Trace code

•

Marking

•

Bulk ID number

8.3

Packing

At customer/subcontractor level, it is recommended to mount the VL53L7CX in a clean environment.

To help avoid any foreign material contamination at final assembly level the modules are shipped in a tape and

reel format with a protective liner.

The liner is compliant with reflow at 260 °C (as per JEDEC-STD-020E).

Note:

The liner must be removed during assembly of the customer device, just before mounting the cover glass.

8.4

Tape outline drawing

VL53L7CX

Inner box labeling

DS13865 - Rev 3

page 31/40