76232103 datasheet(9/34 Pages) TOSHIBA

部件名	76232103

功能描述	Projection Television

PDF	34 Pages

Scroll/Zoom	100%

制造商	TOSHIBA [Toshiba Semiconductor]

网页	http://www.semicon.toshiba.co.jp/eng

标志

9 / 34 page

Turn off the TV and unplug the power cord.

STOP! Allow the lamp to cool for at least one (1) hour

before replacing it.

On the back of the TV, loosen the thumb screw (by hand)

on the lamp unit door, and then remove the lamp unit

door.

Using a manual screwdriver, loosen two screws on the

lamp unit.

Grasp the lamp unit handle and gently pull the lamp unit

straight out of the TV. Set the old lamp unit aside.

Carefully insert the new lamp unit straight into the TV

until it is fully seated.

Note :

Never subject the lamp unit to excessive shock.

Never touch the lamp unit glass or otherwise get it

dirty.

Doing so may affect the image quality and reduce

the service life of the lamp. See “Cleaning the lamp

unit glass” below.

Using a manual screwdriver, tighten two lamp unit

screws.

Note:Hand-tighten only. Do not use an electric screw-

driver.

- 9 -

76232103 数据表(PDF) 9 Page - Toshiba Semiconductor