– 20 –

PROGRAMMING CHANNEL MEMORY

The channel memory is the list of TV channel numbers the TV tunes in when you press the CHANNEL s or t button.

First, use the TV/CABLE and CH PROGRAM functions to preset all active channels in your area automatically.

If necessary, arrange the preset channels with the ADD/ERASE functions so that you can tune into only desired channels.

Note: If you utilize both ANT-1 and ANT-2 terminals for some model, perform programming channels for each input source.

TV/CABLE function

1 Press MENU, then press S or T until the SET UP menu

appears.

2 Press t (or s) until “TV/CABLE” is highlighted.

3 Press : or ; to highlight either “TV” or “CABLE”, whichever

you use.

CH PROGRAM function

1 Select “CH PROGRAM” following steps 1 and 2 above.

2 Press : or ; to start channel programming.

The TV will automatically cycle through all the TV or

CABLE channels selected by the TV/CABLE function, and

store active channels in the channel memory.

3 When channel programming is complete, you will see the

message to the right appears.

4 Press CHANNEL s or t to make sure the channel

programming has been done properly.

ADD/ERASE function

After performing the CH PROGRAM function, you can add or

erase specific channels.

1 Select the channel you want to erase using the CHANNEL

s or t button, or select the channel you want to add using

the Channel Number buttons.

2 Press MENU, then press S or T until the SET UP menu

appears.

3 Press t (or s) until “ADD/ERASE” is highlighted.

4 Press S or T :

To erase the channel press the button until “ERASE” is

highlighted.

To add the channel press the button until “ADD” is

highlighted.

5 Repeat steps 1 to 4 for other channels.

You have now completed the channel programming.

Note: The CHANNEL t/s buttons on the TV function as the

t/s buttons while a menu is on the screen.

* Please refer to owner's manual in detail.