microOLED Display Modules

uOLED-160G2

Page 16 of 20

www.4dsystems.com.au

15. Specifications

ABSOLUTE MAXIMUM RATINGS

Operating ambient temperature ................................................................................................... -35°C to +75°C

Storage temperature ...................................................................................................................... -40°C to +80°C

Voltage on any digital input pin with respect to GND ....................................................................... -0.3V to 6.0V

Voltage on SWITCH pin with respect to GND ................................................................................... -0.3V to 6.0V

Voltage on VCC with respect to GND ................................................................................................. -0.3V to 6.0V

Maximum current out of GND pin .............................................................................................................. 300mA

Maximum current into VCC pin .................................................................................................................. 250mA

Maximum output current sunk/sourced by any pin ....................................................................................... 4mA

Total power dissipation .................................................................................................................................. 1.0W

NOTE: Stresses above those listed here may cause permanent damage to the device. This is a stress rating only

and functional operation of the device at those or any other conditions above those indicated in the

recommended operation listings of this specification is not implied. Exposure to maximum rating conditions for

extended periods may affect device reliability.

RECOMMENDED OPERATING CONDITIONS

Parameter

Conditions

Min

Typ

Max

Units

Supply Voltage (VCC)

4.0

5.0

5.5

V

Operating Temperature

-30

--

+70

°C

Input Low Voltage (VIL)

RX Pin

GND

--

0.8

V

Input High Voltage (VIH)

RX Pin

2.0

3.3

5.0

V

Reset Pulse

External Open Collector

2.0

--

--

µs

Operational Delay

Power-Up or External Reset until the

module has been able to communicate

or until the application has started

--

3000

--

ms

GLOBAL CHARACTERISTICS BASED ON OPERATING CONDITIONS

Parameter

Conditions

Min

Typ

Max

Units

Supply Current (ICC)

VCC = 5.0V, very dependent on

operating conditions, uSD usage,

screen display colour (ie White)

14

60

200

mA

Low Power Current (ICC)

VCC = 5.0V, Contrast = 0

300

500

--

µA

Output Low Voltage (VOL)

TX, IO1, IO2, IOL = 3.4mA

--

--

0.4

V

Output High Voltage (VOH)

TX, IO1, IO2, IOL = -2.0mA

2.4

--

3.3

V

A/D Converter Resolution

IO1 Pin

--

8

10

bits

Capacitive Loading

All pins

--

--

50

pF

Flash Memory Endurance

PmmC/4DGL Programming

--

1000

--

E/W