Cabling instructions for shielded contacts

10

Straight crimp shielded contacts:

Right angle crimp shielded contacts:

Solder straight shielded contacts:

Solder right angle shielded contacts:

inner solder contact

outer crimp contact

inner solder contact

outer crimp contact

soft solder

coaxial shell

outer ring

outer ring

braided shield

inner sleeve

soft solder

coaxial shell

outer ring

outer ring

solder

braided shield

inner sleeve

crimp

3.20

soft solder

coaxial shell

outer ring

outer ring

inner sleeve

crimp

3.20

Assembly method

- Slide the outer ring over the cable jacket. Trim the cable

according to the recommended dimensions.

- Insert the cable dielectric and the center conductor inside

the inner sleeve.

- Solder the central conductor to the shielded center

contacts.

- Slide the outer ring towards the inner sleeve ans recover

the braid.

- Using crimp hand tool equipped with the appropriate dies,

crimp in the area defined.

soft solder cap into shell after cable

assembly on 90˚ type coaxes

solder

soft solder

coaxial shell

outer ring

outer ring

inner sleeve

soft solder cap into shell after cable

assembly on 90˚ type coaxes

Assembly method

- Slide the outer ring over the cable jacket. Trim the cable

according to the recommended dimensions.

- Insert the cable dielectric and the center conductor inside

the inner sleeve.

- Solder the central conductor to the shielded center

contacts.

- Slide the outer ring towards the inner sleeve ans recover

the braid.

- Solder by introducing metal through the outer ring hole.