B8-17

CASE H

CASE H

BOTTOM VIEW

See Figures 29 – 34

for pin configurations.

2.125 max

(53.98)

1.125 max

(28.58)

Materials

Header Cold Rolled Steel/Nickel/Gold

cases H1 and H2

Cold Rolled Steel/Nickel/Tin

cases H3, H4, and H5

Cover

Kovar/Nickel

cases H1 and H2

Cold Rolled Steel/Nickel/Tin

cases H3, H4, and H5

Pins

#52 alloy

ceramic seal

case H1

case H2 (except MHV Series Single and Dual)

compression glass seal

MHV Series Single and Dual

case H3, H4, H5

Case dimensions in inches (mm)

Tolerance

±0.005 (0.13) for three decimal places

±0.01 (0.3) for two decimal places

unless otherwise specified

CAUTION

Heat from reflow or wave soldering may damage

the device. Solder pins individually with heat

application not exceeding 300

°C for 10 seconds

per pin.

Dot on top of case indicates pin one

0.155 (3.94)

0.955 (24.26)

Seam Seal

0.040 dia

(1.02)

0.000

0.555 (14.1)

1.110 (28.19)

12

3

4

5

FMC EMI Filter: Screening – Standard, ES, or 883

SFMC EMI Filter: Screening – Space Standard, H, or K

BOTTOM VIEW CASE H1

Squared corner and dot on top

of case indicate pin one.

Note: Although every effort has been made to render the case drawings at actual size, variations in the printing process may cause some distortion. Please refer

to the numerical dimensions for accuracy.