- 39 -

All Data Subject To Change Without Notice

www.andersonpower.com

POWERPOLE® 15/45 ACCESSORIES

[ 16.6 ]

0.655

[ 7.9 ]

0.312

[ 24.6 ]

0.968

[ 7.9 ]

0.312

[ 16.6 ]

0.655

[ 7.9 ]

0.312

Short with Hole

Short without Hole

Long

A

B

Mounting Wing

Secure dovetailed Powerpole® 15/45 series housings by passing fasteners through the wings

in either a horizontal or vertical orientation. Useful for sheet metal panels, printed circuit boards,

and many other mounting surfaces. Fasteners not included.

Description

Part Numbers

Minimum Quantity

2,500

100

Red

1399G9-BK

1399G9

Blue

1399G8-BK

1399G8

Spacer

Used to separate housings under high power to minimize derating. They are

recommended for squaring off a block of Powerpole® 15/45 housings for use in connector shells

and mounting clamps. Use a combination of long and short spacers opposite each other in a

mated block to add keying features or use two short spacers to avoid interference. Spacers with

holes can also be used to fasten the blocked housings to a surface with a fastener.

Description

Part Numbers

Minimum Quantity

2,500

100

Red, Short w/ Hole

1399G1-BK

1399G1

Red, Long

1399G2-BK

1399G2

Red, Short

1399G6-BK

1399G6

Black, Long

1399G10-BK 1399G10

Blue, Short

1399G13-BK 1399G13

White, Short w/ Hole

1399G14-BK 1399G14

White, Long

1399G17-BK 1399G17

Retaining Pins

Keep stacked Powerpole® 15/45 series housings from separating. Retaining pins are inserted in

the circular opening between two housings stacked side by side.

Dimensions

- A -

- B -

Description

Part Numbers

inches

mm

inches mm

Minimum Quantity

1,000

100

1 Block High

H1507P38 110G16

0.093 / 0.103 2.360 / 2.62

0.250 6.350

2 Block High

111812P5

110G17

0.093 / 0.103 2.360 / 2.62

0.440 11.180

Mounting Clamp

Mounting clamps can be used for fastening a block of Powerpole® 15/45 series

housings to a panel. Connector blocks must be a complete square for the clamps

to work properly. Fastening hardware not included.

Description

Part Numbers

Minimum Quantity

100 sets of 2

2 or 4 Pole

1462G1

3 or 6 Pole

1462G2

4 or 8 Pole

1462G3

Mounting Wings

[ 16.7 ]

0.66

[ 7.9 ]

0.31

[ 4.6 ]

0.18 SQ

2 or 4 Pole

3 or 6 Pole

4 or 8 Pole