DATA SHEET

© EnOcean | www.enocean.com

Subject to modifications | October 2019

Batteryless Wall Switches for

ZigBee

EWSxZ / EWSxZG

EWSxZ / EWSxZG Easyfit Wall Switches are

universal

energy

harvesting

wireless

switches for systems communicating based

on the 2.4 GHz ZigBee Green Power radio

standard (ZGP).

They are based on the maintenance free,

self-powered

pushbutton

transmitter

module PTM 215ZE or PTM 216Z and

delivered as single rocker or double rocker

variant using the European 55 x 55 form

factor for frame inserts.

The used PTM modules contain an electro-

dynamic energy transducer which is actuated by

the rocker movement. Whenever a rocker is

pushed down or released, electrical energy is

created and ZGP radio frame is transmitted

identifying the rocker status (pushed or released).

„Long“ or „Short“ rocker press (the time between

pushing and releasing the rocker) can be

calculated

by

the

receiver.

This

enables

switching, dimming control or jalousie control

including slat action.

The enclosed switch frame can be replaced by

frames of the following design programs:

Manufacturer

Product Program

BERKER

S.1, B.1, B.3, B.7 Glas

GIRA

Standard 55, E2, E3, Event,

Esprit, ClassiX

Jäger Direkt

Opus 55 Inform, Opus 55

Kubus, Opus 55 Fusion

JUNG

AS 500, A 500, A plus,

A creation, A creation Glas

MERTEN

1-M, M-Smart, M-Arc, M-Plan,

M-Creativ, M-Pure

Ordering Information

TYPE

Single Wall Switch EWSSZ

Double Wall Switch EWSDZ

Single Wall Switch EWSSZG

Double Wall Switch EWSDZG

ORDERING CODE

E8271-A270

E8271-A280

E8271-A276

E8271-A286

Feature Overview

Radio Transmitter

EWSxZ: PTM 215ZE module, EWSxZG: PTM216Z

Energy Source

Electro-dynamic energy generator, maintenance free

Frequency / Protocol

2.4 GHz / ZigBee Green Power (ZGP)

Range

Within one room (up to 10 m line of sight)

Channels

2 or 4 (single or double rocker with medial position, pressed/released)

Dimensions of Rocker

50 x 50 mm

Dimensions of Frame Insert

55 x 55 mm

Dimensions of Central Plate

71 x 71 mm

Dimensions of Frame

81 x 81 mm

Total Installation Height

14 mm (frame lies directly against the wall)

Mounting

Gluing (double-sided mounting film enclosed),

Screwing onto flat surface

Operating conditions

Temperature: -25 … +65°C

Humidity:

0 … 95% r.h., non-condensing (dry environment only)

Lifetime

> 50.000 actuations (switching cycles) according to EN 60669 /

VDE 0632

Approvals

RED, FCC, ISED

Packaging

Each unit packed in a bag, 10 units packed in a card box