LED Controller 0-10V

• Interoperable. Communicates wirelessly with other

devices using the EnOcean wireless standard.

• Enables wireless dimming of LED fixtures.

• Supports daylight harvesting scenarios, occupancy

control and manual dimming with input from self-powered

wireless switches and sensors. Implements load shedding

initiated by separate Demand Response controllers.

• Compact size enables flexible installation inside or next to

electrical boxes and fixtures.

• Commission your LED lighting with EnOcean's intuitive, easy-

to-use wireless ReComm software to link devices and set

parameters (e.g. timeouts, ramp speeds) from a laptop com-

puter. Manual push buttons may also be used for linking and

simple commissioning.

• Two molded buttons and one LED indicator light can be used to

configure or manually control the device.

A simple solution for wireless control and daylight harvesting.

The LED controller uses wireless technology to communicate with other self-powered EnOcean-based

products and provides an amazingly simple solution for dimming control of LED lighting. It is directly

supplied from the auxiliary 12V supply output of a connected LED driver. The compact size enables

flexible installation inside of or next to electrical boxes and fixtures so it can be easily wired out of sight

using standard wiring practices. Simply link the module to an EnOcean-based motion sensor, light

sensor, switch or rocker pad and experience levels of efficiency and convenience that can only be

achieved through wireless controls. It is also possible to link the LED controller to a central controller or

via a gateway to building automation systems like BACnet.

Features & Benefits

0-10V

GND

12V

To LED

driver

From LED

driver