Stroke

S080D

S080T

S080Q

25

85mm (3.3in)

100mm (3.9in)

115mm (4.5in)

50

110mm (4.3in)

125mm (4.9in)

140mm (5.5in)

100

160mm (6.3in)

175mm (6.9in)

190mm (7.5in)

150

210mm (8.3in)

225mm (8.9in)

240mm (9.4in)

200

260mm (10.2in)

275mm (10.8in)

290mm (11.4in)

Shaft Length (L)

Shaft Mass

Shaft Diameter (D) - 8mm ±0.1

Stroke

Support Length (L2)

Max. Bending

All

10mm

0.05mm

Support and Bending

Wire Type

UL 1430

Wire AWG

28

U Phase

Red

V Phase

White

W Phase

Black

Standard Lead Wire

300mm lead wire bare leads. The bending

radius of the motor cable should be 10.72

mm as suggested by the wire manufacturer.

Receptacle Housing

XMR-03V

Plug Housing

XMP-03V

Retainer

XMS-03V

Pin Contact

SXM-001T-P0.6

Socket Contact

SXA-001T-P0.6

Connector (Motor Cable)

To be installed by the user.

Spec

S080T

S080Q

Forcer Spacing Distance

5mm

Pole (N/S) Distance

15mm

Forcer Length

55mm

70mm

Flip Forcers

No

Yes

Forcer Spacing Distance

Forcer Spacing Distance

Stroke

S080D

S080T

S080Q

25

0.02kg (0.05lb)

0.03kg (0.06lb)

0.03kg (0.07lb)

50

0.03kg (0.07lb)

0.04kg (0.08lb)

0.04kg (0.09lb)

100

0.05kg (0.11lb)

0.05kg (0.12lb)

0.06kg (0.13lb)

150

0.07kg (0.15lb)

0.07kg (0.16lb)

0.08kg (0.17lb)

200

0.08kg (0.19lb)

0.09kg (0.2lb)

0.1kg (0.21lb)

Tandem Forcer

Total Length (L)=Stroke (S)+Forcer Length (A)+(Support Length (L2)x2)

FGA/CE Type Lead Wire

300mm lead wire bare leads. The

bending radius of the motor cable

should be 16.96mm as suggested

by the wire manufacturer. FG type

with insulating sheet between coils

and case. Meets all requirements of

EN60034-1 (1998).

Ground Wire

Wire Type

UL 1330

Wire AWG

24

U Phase

Red

V Phase

White

W Phase

Black

Tandem S080D forcers are possible, but are equivalent

to one (1) S080Q forcer and thus are not listed above.

Additional stroke lengths are available (up to 230mm for S080D and up to 215mm for S080T). Contact Nippon Pulse for more information.

Note: Metric units guaranteed. Imperial (United States customary) units are calculated.

www.nipponpulse.com

For assistance in selecting the best motor for your application, contact Nippon Pulse

to speak with an applications engineer. 1-540-633-1677

Not all motors on this datasheet have received a CE Declaration of Conformity. Only the standard S080D, S080T and S080Q motors have been certified to CE

standards. The motors and motor options with the following designations have not received a CE Declaration of Conformity, and as such are designated FGA:

S080D-1S, S080T-1S, S080Q-2S, S080Q-1S, any S080 motor with Hall Effects.