EVK-R6 - User guide

UBX-21035387 - R02

Appendix

Page 16 of 23

C1-Public

6.

Now the new modem is visible under the

Modems tab in Control Panel > Phone and

Modem.

Any extra initialization AT command (e.g., to set

a specific APN name) can be entered by

selecting Properties and filling in the “Extra

initialization commands” text box under the

Advanced tab.

Now the module is ready, and the connection can be configured.

The modem configuration can also be edited by clicking on the modem name in the Device Manager.

B.2 How to install and configure a high data rate modem

connection

This example describes how to install and configure a high data rate packet data connection on a PC

with the Windows 10 operating system, using the TCP/IP stack of the PC, over the native USB

interface of the cellular module connected to the Windows PC by the Cellular Native USB connector

(J105 on the ADP-R6).

1. Open the Control Panel, go to the Network

and Sharing Center, and select “Set up a

new connection or network”.

2.

Select “Connect to the Internet” and click

“Next”.