6 Specifications

6.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)(1)

MIN

MAX

UNIT

Input Supply Voltage: VCC – VEE

–0.3

6

V

Input Voltage (IN+, IN–)(2)

VEE – 0.3

VCC + 0.3

V

Differential Input Voltage (VDI = IN+ – IN–)

–(VCC – VEE + 0.3) + (VCC –VEE + 0.3)

V

Output Voltage (OUT)(3)

VEE – 0.3

VCC + 0.3

V

Latch and Hysteresis Control (LE/HYS)

VEE – 0.3

VCC + 0.3

V

Current into Input pins (IN+, IN–, LE/HYS)(2)

±10

mA

Current into Output pins (OUT)(3)

±50

mA

Junction temperature, TJ

150

°C

Storage temperature, Tstg

–65

150

°C

(1)

Operation outside the Absolute Maximum Ratings may cause permanent device damage. Absolute Maximum Ratings do not imply

functional operation of the device at these or any other conditions beyond those listed under Recommended Operating Conditions.

If used outside the Recommended Operating Conditions but within the Absolute Maximum Ratings, the device may not be fully

functional, and this may affect device reliability, functionality, performance, and shorten the device lifetime.

(2)

Input terminals are diode-clamped to the power-supply rails. Input signals that can swing more than 0.3 V beyond the supply rails must

be current-limited to 10 mA or less.

(3)

Output terminals are diode-clamped to the power-supply rails. Output signals that can swing more than 0.3 V beyond the supply rails

must be current-limited to 50 mA or less.

6.2 ESD Ratings

VALUE

UNIT

TLV3601(DCK), TLV3603

V(ESD)

Electrostatic

discharge

Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1)

±2000

V

Charged-device model (CDM), per ANSI/ESDA/JEDEC JS-002(2)

±1000

TLV3601(DBV)

V(ESD)

Electrostatic

discharge

Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1)

±2000

V

Charged-device model (CDM), per ANSI/ESDA/JEDEC JS-002(2)

±750

TLV3602

V(ESD)

Electrostatic

discharge

Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1)

±2000

V

Charged-device model (CDM), per ANSI/ESDA/JEDEC JS-002(2)

±1000

(1)

JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.

(2)

JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.

6.3 Recommended Operating Conditions

over operating free-air temperature range (unless otherwise noted)

MIN

MAX

UNIT

Input Supply Voltage: VCC – VEE

2.4

5.5

V

Input Voltage Range (IN+, IN–)

VEE – 0.3

VCC + 0.3

V

Latch and Hysteresis Control (LE/HYS)

VEE – 0.3

VCC + 0.3

V

Ambient temperature, TA

–40

125

°C

www.ti.com

TLV3601, TLV3602, TLV3603

SNOSDB1D – JUNE 2021 – REVISED NOVEMBER 2022

Copyright © 2022 Texas Instruments Incorporated

Submit Document Feedback

5

Product Folder Links: TLV3601 TLV3602 TLV3603