PLA-11

PLA150F

External view

Features

*1 This is the result of measurement of the testing board with capacitors of

22mF and 0.1mF placed at 150 mm from the output terminals by a 20

MHz oscilloscope or a ripple-noise meter equivalent to Keisoku-Giken

RM103.

See 1.6 of Instruction Manual for more details.

When the load factor is 0 - 30%, the switching power loss is reduced by

burst operation, which will cause ripple and ripple noise to go beyond

the specifications.

*2 Drift is the change in DC output for an eight hour period after a half-

hour warm-up at 25C.

*3 As for DC input, consult us for advice.

*4 Consult us about dynamic load and input response. Measure the output

voltage by using the average mode of the tester to deal with the burst

operation at 30% load or less.

*5 Output power derating is required. See 3.2 in Instruction Manual.

*6 See 3.3 in Instruction Manual for more details.

*7 Consult us about safety agency approvals for the models with optional functions.

*8 Consult us about other classes.

Block diagram

The external size of –R option, –J option, –N1 option and –T option models is different from the standard model. See “5. Options and

Others” in Instruction Manual for more details.

*9 The RC terminal is added to option –R models. The RC terminal

is isolated from input, output, and FG.

*

Do not use the power supply in overcurrent conditions or in unspecified

input voltage ranges. Otherwise the internal components may be

damaged.

*

Parallel operation is not possible with this mode.

*

Sound noise may be heard from the power supply when used for

pulse load.

OTHERS

CASE SIZE/WEIGHT

41X97X129mm [1.61X3.82X5.08 inches] (Excluding terminal block and screw) (WXHXD) / 600g max

COOLING METHOD

Convection

WARRANTY WARRANTY

*6

5 years (subject to the operating conditions)

AC IN 85 - 264V

FG

DC OUT

RC(-R)

RECTIFIER

OVER VOLTAGE

PROTECTION

CURRENT

SENSING

NOISE

FILTER

INRUSH

CURRENT

LIMIT

RECTIFIER

AND

FILTER

FUSE

250V 4A

INVERTER

CONTROL

EXTERNAL

SOURCE

CONTROL

INVERTER

CURRENT

SENSING

RECTIFIER

AND

FILTER

BOOSTER

INDUCTOR

- Compact design (Depth: 129mm 5.08inches)

- High efficiency (90%typ PLA150F-24, AC230Vin, 100% load)

- Low power consumption (1.5W typ AC240Vin, no load at standard model)

- UL508 approved (Except option -J), and complies with SEMI F47 (see instruction manual 1.1)

- Various connection interface options (vertical terminal [-T], AMP connector [-J])

SPECIFICATIONS

LED

Output voltage

adjustable potentiometer

Output terminal(+)

Output terminal(–)

FG( )

AC(N)

AC(L)

Name plate

M3.5

2-M3

Mounting hole

3-M3

Mounting hole

(Bottom side)

Point A

Point B

2

1

CN4

Connector for

Remote ON/OFF (option)

Terminal cover

96±0.5

19

129

12.5max

48

70±0.5

121

4

[0.75]

[0.49]

[5.08]

[3.78]

[0.16]

[4.76]

[1.89]

[2.76]

14±1.5

[0.55]

15.3±1.5(LED)

[0.6]

11.6±1.5(potentiometer)

[0.46]

¶ Tolerance : ±1 [±0.04]

¶ Weight : 600g max

¶ PCB Material/thickness : CEM-3 / 1.6mm [0.06inches]

¶ Chassis material : Aluminum

¶ Cover material : Electric galvanizing steel board

¶ Dimensions in mm, [ ]=inches

¶ Mounting torque : 0.49N-m max

¶ Screw tightening torque : M3.5 1.0N-m max

¶ Connect the input FG to safety earth ground.

April 17, 2018