2

SANKEN ELECTRIC CO., LTD.

SWF Series High Peak Load SM Power Supplies

SWF-PD01

July 17, 2013

Sanken reserves the right to make, from time to time, such departures from the detail specifications as may be required to permit improvements in

the performance, reliability, or manufacturability of its products. Therefore, the user is cautioned to verify that the information in this publication is

current before placing any order.

When using the products described herein, the applicability and suitability of such products for the intended purpose shall be reviewed at the users'

responsibility.

Although Sanken undertakes to enhance the quality and reliability of its products, the occurrence of failure and defect of semiconductor products at a

certain rate is inevitable.

Users of Sanken products are requested to take, at their own risk, preventative measures including safety design of the equipment or systems against

any possible injury, death, fires or damages to society due to device failure or malfunction.

Sanken products listed in this publication are designed and intended for use as components in general-purpose electronic equipment or apparatus

(home appliances, office equipment, telecommunication equipment, measuring equipment, etc.). Their use in any application requiring radiation

hardness assurance (e.g., aerospace equipment) is not supported.

When considering the use of Sanken products in applications where higher reliability is required (transportation equipment and its control systems or

equipment, fire- or burglar-alarm systems, various safety devices, etc.), contact a company sales representative to discuss and obtain written confir-

mation of your specifications.

The use of Sanken products without the written consent of Sanken in applications where extremely high reliability is required (aerospace equipment,

nuclear power-control stations, life-support systems, etc.) is strictly prohibited.

The information included herein is believed to be accurate and reliable. Application and operation examples described in this publication are given

for reference only and Sanken assumes no responsibility for any infringement of industrial property rights, intellectual property rights, or any other

rights of Sanken or any third party that may result from its use. The contents in this document must not be transcribed or copied without Sanken’s

written consent.

Important Information

• The products described in this document are built-in type DC stabilized power supplies with special structures and are designed for installation in

equipment. Be sure to use the products only for installation in equipment.

• The products should be handled only by persons who have competent electrical knowledge.

• Be sure to read through all safety precaution and operation manuals before installation, operation, or maintenance and to use the products only for

the intended use and in accordance with all applicable safety standards and regulations in the location of use.

!