| 数据搜索系统,热门电子元器件搜索 |
|
HAL501 数据表(PDF) 40 Page - Micronas |
|
|
|||||||||||||||||||||||||||||
HAL501 数据表(HTML) 40 Page - Micronas |
|
40 / 48 page ![]() HAL 516 DATA SHEET 40 April 15. 2010; DSH000020_004EN Micronas 4.10. HAL 516 The HAL 516 is the most sensitive unipolar switching sensor with an inverted output of this family (see Fig. 4–37). The output turns high with the magnetic south pole on the branded side of the package and turns low if the magnetic field is removed. The sensor does not respond to the magnetic north pole on the branded side. For correct functioning in the application, the sensor requires only the magnetic south pole on the branded side of the package. In the HAL 5xx family, the HAL 506 is a sensor with the same magnetic characteristics but with a normal output characteristic. Magnetic Features: – switching type: unipolar inverted – high sensitivity –typical BON: 3.5 mT at room temperature –typical BOFF: 5.5 mT at room temperature – operates with static magnetic fields and dynamic magnetic fields up to 10 kHz – typical temperature coefficient of magnetic switching points is −1000 ppm/K Applications The HAL 516 is the optimal sensor for all applications with one magnetic polarity and weak magnetic ampli- tude at the sensor position where an inverted output signal is required such as: – applications with large air gap or weak magnets, – solid state switches, – contactless solution to replace microswitches, – position and end-point detection, and – rotating speed measurement. Fig. 4–37: Definition of magnetic switching points for the HAL 516 Magnetic Characteristics at TJ = −40 °C to +170 °C, VDD = 3.8 V to 24 V, Typical Characteristics for VDD = 12 V Magnetic flux density values of switching points. Positive flux density values refer to the magnetic south pole at the branded side of the package. The hysteresis is the difference between the switching points BHYS = BON − BOFF The magnetic offset is the mean value of the switching points BOFFSET = (BON + BOFF) / 2 BON BOFF 0 VOL VO Output Voltage B BHYS Parameter On point BON Off point BOFF Hysteresis BHYS Magnetic Offset Unit TJ Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. −40 °C 2.1 3.8 5.4 4.3 5.9 7.7 1.6 2.1 2.8 − 4.8 − mT 25 °C 2 3.5 5 3.8 5.5 7.2 1.5 2 2.7 3.8 4.5 6.2 mT 140 °C 1.8 3.1 5.1 3.4 4.8 6.9 1 1.7 2.6 − 4 − mT 170 °C 1.7 3 5.2 3.2 4.6 6.8 0.9 1.6 2.6 − 3.8 − mT |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |