 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
QL 数据表(PDF) 6 Page - Panasonic Semiconductor |
|
|
|||||||||||||||||||||||||||||
QL 数据表(HTML) 6 Page - Panasonic Semiconductor |
|
|
6 / 21 page  42 MOUNTING METHOD 1. L socket type 1) After loosening the L socket fastening screws, grasp the terminal cover and pull it away from the switch body. 2) Remove the fastening screw from the terminal block. (Remove with the 3 termi- nal receptacle.) 3) Loosen the hexagonal nut and remove the rubber bushing and washer from the inside. 4) Select cord from applicable wire table. 5) Decide which direction the cord outlet is to face and strip the sheath according- ly. (See page 43.) 6) After passing the applicable cord through the hexagonal nut, bushing, and washer in that order, pass the cord through the terminal case. 7) After stripping the cord sheath, insert the corresponding wires into the grooves of the terminal body up to the wire stop, then crimp the terminal receptacle over the wires with a pair of pliers. 8) After the terminals have been properly crimped in the terminal body, insert the body into the terminal case. (When inserting the body, be careful not to block the hole for the fastening screw with the wires.) 9) Temporarily screw in the fastening screw through the terminal body, then insert the washer and rubber bushing into the cord opening of L socket. Tighten it with a wrench or pliers. 10) Apply the rubber packing over the terminals, then insert the L socket into the switch body. 11) Tighten the fastening screw into the switch body. 2. Socket with cord (including socket with lamp) 1) Apply the rubber packing over the ter- minals, then insert the socket with cord into the switch body. 2) Screw the socket fastening screw into the switch body and tighten it. Mounting The QL micro limit switch is manufac- tured with a very small variation in the distance between the datum plane and the operating point. When the operating point has been accurately established and the mounting position clearly deter- mined, two M4 bolts should be used securely fastening the switch. Pull away from the body. Turn counterclockwise. Terminal receptacle Terminal body connection diagram Turn counterclockwise. Clockwise direction Clockwise direction Operating position M4 fastening bolts Mounting Mounting plate datum plane (O.P.) Lead wire stop Terminal body Terminal receptacle Lead wire QL (AZ4) |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
