 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
AS3682 数据表(PDF) 1 Page - ams AG |
|
|
|||||||||||||||||||||||||||||
AS3682 数据表(HTML) 1 Page - ams AG |
|
|
1 / 43 page  AS3682 480mA Camera Lighting Management Unit www.austriamicrosystems.com Revision 2.21 1 - 43 austriamicrosystems Dat a Sh eet 1 General Description The AS3682 is a low-noise, high-current charge pump designed for camera flash LEDs and LCD backlighting applications. The device is capable of driving up to 480mA of load current. The AS3682 integrates two independent LED blocks for driving a single flash LED (CURR11 to CURR13) with up to 480mA, and general purpose LEDs (CURR2 to CURR4) with up to 160mA/LED. The general purpose LEDs are controlled individually and can be used for backlighting, but also in support of an RGB fun-light or a movie indicator lamp. The AS3682 utilizes austriamicrosystems' patent-pend- ing Intelligent Adaptive Mode Setting (IAMS) to switch between 1:1, 1:1.5, and 1: 2 modes. In combination with very-low-drop-out current sinks, the device achieves high efficiency over the full single-cell Li+ battery voltage range. The charge pump operates at a fixed frequency of 1MHz allowing for tiny external components and its design ensures low EMI and low input-ripple. The ultra-flexible brightness control scheme allows for simple adaptation of the device to different system archi- tectures. In Normal and Soft Flash Modes the device is controlled by an I2C interface. In these modes the LED brightness, flash duration, GPIOs and various charge pump states are controlled by internal register settings. The GPIO pins can act as programmable input or output pins and can also be set to trigger preview and flash light directly by a camera module. In Hard Flash Mode, the LED brightness is controlled by the Enable pins. Those programming pins can be used as simple enable pins, as PWM input, again offering ample flexibility for setting the LED brightness. 2 Key Features ! High-Efficiency High-Power Charge Pump - 1:1, 1:1.5, and 1:2 Intelligent Adaptive Mode Set- ting (IAMS) - Efficiency up to 95% - Soft Start to Reduce Inrush Current - Low-Noise Constant-Frequency Operation ! Current Sinks - 400mA Continuous Flash Current (@VIN = 3.2 to 5V, VOUT = 5V) - 480mA Maximum Pulsed Flash Current - Programmable: 0 to 160mA, 0.625mA Resolution ! Flexible Brightness Control - Three 0 to 160mA LEDs - Individually Addressable via I2C Interface ! Three Operating Modes - Normal Mode (I2C Interface) - Soft Flash Mode (I2C Interface) - Dedicated Control Pins for Hard Flash Modes ! Two General Purpose Inputs/Outputs - Digital Input, Output, and Tristate - Programmable Pull-Up and Pull-Down - Strobe Pin can be used for Camera Flash Control ! LED Disconnect in Shutdown ! Open LED Detection ! Low Stand-By Current (6µA), Interface Fully Operating ! Low Shut-Down Current (0.2µA) ! Wide Battery Supply Range: 3.0 to 5.5V ! Thermal Protection ! 24-Pin, Small Form-Factor QFN Package - 4 x 4 x 0.85mm, 0.5mm Pitch - Enhanced Thermal Characteristics 3 Applications Lighting management for cameras, mobile telephones, PDAs, and other 1-cell Li+ or 3-cell NiMH powered devices . |
类似零件编号 - AS3682 |
|
类似说明 - AS3682 |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
