Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions

at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and

disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.

The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support

or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make

changes to its products at any time without notice.

Specification: DS-PAA191-R02.0

©Copyright 2003, Clare, Inc.

All rights reserved. Printed in USA.

6/18/03

For additional information please visit our website at: www.clare.com

Dimensions

mm

(inches)

MECHANICAL DIMENSIONS

Tape and Reel Packaging for 8 Pin Surface Mount Package

K

(0.165)

Top Cover

Tape

P = 12.00

(0.472)

User Direction of Feed

W = 16.30 max

(0.642 max)

Bo = 10.30

(0.406)

Embossment

Embossed Carrier

Top Cover

Tape Thickness

0.102 MAX.

(0.004 MAX.)

Ao = 10.30

(0.406)

330.2 DIA.

(13.00 DIA.)

18

K

(0.193)

NOTE:

Tape dimensions not shown, comply with JEDEC Standard EIA-481-2