POWER

Power Supply

(sold separately)

10 – 60 VDC (2–Way Molex connector

Power Consumption

Idle: 2.5 W

Average: 4 W

Peak: 11 W

Sleep Mode: 10mW

ENVIRONMENTAL

Temperature Range

Operating: -40 to +75 °C

Storage: -40 to +85 °C

Humidity

Operating: 0 to 95 %

Storage (Non-condensing): 0 to 95 %

Cold Start

-35 °C

Operating Altitude

2000 m / 70 kPa

Ingress Protection Rating

IP30

WI-FI - 802.11 A/B/G/N, AP OR CLIENT MODES *Optional

Supported Wi-Fi band

2.4 GHz, 5.4 GHz

Encryption

None, WEP, TKIP, AES

5 GHz supported

channels

36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165

2.4 GHz supported

channels

1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14

Number of clients

10

Authentication

Open, Shared, WPA–PSK, WPA2–PSK

MECHANICAL

Plastic or metal case with plastic or metal DIN rail

Enclosure

Dimensions

55x97x125 mm

Weight Plastic

170 g

Weight Metal

375 g

SOFTWARE

Network and Routing

DHCP Server, , DHCP Client, NAT/PAT, VRRP, Dynamic DNS client, DNS proxy, VLAN, QoS, NTP Client/ Server, IGMP, BGP, OSPF, RIP, SMTP, SMTPS,

SNMP v1/ v2c/ v3, Backup routes, PPP, PPPoE, SSL, Port Forwarding, Host Port Routing, Ethernet Bridging

Security

HTTPS, SSH, VPN tunnels, SFTP, Firewall (IP Filtering, MAC address filtering, Inbound and outbound Port filtering), DMZ (via iptables)

VPN Tunnelling

Open VPN client and server and P2P, L2TP, PPTP, GRE, EasyVPN, DMVPN, IPSec with IKEv1 and IKEv2

Configuration

Web server, SSH, Four configuration switchable profiles, Automatic configuration update from server Backup configuration, Restore configuration

Firmware Management

Automatic firmware update from server, Locally via LAN and USB, Over-the-Air software updates

Diagnostic

One CLICK report – current configuration / factory identification / system log / kernel log / reboot log / routing table, Remote diagnostics possible via

SSH

Status

Network Status, DHCP Status, IPSec Status, Statistics history for last 60 days

Log

System Log, Reboot Log, Kernel Log

Controlling and

Diagnostic

SNMP v1/v2c/v3, Statuses, Log

Event Engine

StartUp script & Up/Down script (Bash), Digital Input, Network Parameters, Data Usage, Timer, Power, Device Temperature

Report Types: email, SNMP Trap

Other

IPv6 support

HW SPECIFICATIONS

PORTS, LED, ANTENNAS

5x ETH ports

RJ45, 10/100 Mbps

LED Indicators

PWR, ETH, USR, POE, IN0, IN1, OUT

Wi-Fi Antenna (sold separately)

R-SMA connector

USB

USB Host connector 2.0

SD Card

1x Micro SD Card slot (rear panel)

RST

RESET button (rear panel)

POE

PARAMETERS

POE PD

parameters for opposite PSE

P0E PSE

Input voltage

range

42.5 – 57 V

44 – 57 V, 65 W

Power available

25.50 W

2x 25.50 W

(ETH0, ETH1)

Maximum current

600 mA

Insul. Strength

1.5 kV from the router

none

Standards IEEE 802.3at-2009 (PoE+) and IEEE 802.3af-2003 (PoE) supported. Cabling

needed is Category 5, up to 12.5 Ω. It is possible to use a passive PoE injector

SmartFlex SR300

FLEXIBLE, MODULAR LAN ROUTER