Rev. C 11/18

4

CAP200DG

www.power.com

Notes

A. Saturation current specifications ensure a natural RC discharge characteristic at all voltages up to 265 VAC peak with the external resistor

values specified in Component Selection Table 1.

B. Specifications are guaranteed by characterization and design.

Absolute Maximum Ratings(4)

DRAIN Pin Voltage(1) ............................................................1000 V

DRAIN Peak Current(2) .......................................................5.333 mA

Storage Temperature ..............................................-65 °C to 150 °C

Lead Temperature(3) ..............................................................260 °C

Operating Ambient Temperature.............................. -10 °C to 105 °C

Maximum Junction Temperature .............................. -10 °C to 110 °C

Notes:

1. Voltage of D1 pin relative to D2 pin in either polarity.

2. The peak DRAIN current is allowed while the DRAIN voltage is

simultaneously less than 400 V.

3. 1/16 in. from case for 5 seconds.

4. The Absolute Maximum Ratings specified may be applied one at a

time without causing permanent damage to the product.

Exposure to Absolute Maximum Rating conditions for extended

periods of time may affect product reliability.

Parameter

Symbol

Conditions

T

A = -10 to 105 °C

(Unless Otherwise Specified)

Min

Typ

Max

Units

Control Functions

AC Removal

Detection Time

t

DETECT

Line Cycle Frequency 47-63 Hz

22

31.4

ms

Drain Saturation

CurrentA,B

I

DSAT

CAP200DG

2.5

mA

Supply Current

I

SUPPLY

T

A = 25 °C

21.7

mA

Thermal Resistance

Thermal Resistance: D Package(1):

(q

JA).................160 °C/W (Single layer JEDEC PCB)

(q

JC).......................................... 40 °C/W (Bottom)

(q

JC)............................................... 75 °C/W (Top)

Notes:

1. Reference thermal resistance test conditions: JEDEC JESD51-3,

SEMI Test Method #G43-87, and MIL-STD-883 Method 10121.1.