PI5USB2546J

www.diodes.com

November 2020

Document Number DS43167 Rev 1-2

3

© Diodes Incorporated

PI5USB2546J

Maximum Ratings

AllInput(exceptINtoOUT,andDP_IN,DM_IN,DP_OUT,DM_OUT)...........-0.3Vto+6.0V

INtoOUT ......................................................................................................................................-6.0Vto+6.0V

DP_IN,DM_IN,DP_OUT,DM_OUT.........................................................-0.3VtoIN+0.3or+5.7V

Inputclampcurrent(DP_IN,DM_IN,DP_OUT,DM_OUT)..................................................±20mA

ContinuouscurrentinSDPorCDPmode

(DP_INtoDP_OUTorDM_INtoDM_OUT)..........................................................................±100mA

ContinuouscurrentinBC1.2DCPmode(DP_INtoDM_IN)...................................................±50mA

Continuousoutputcurrent(OUT)........................................................................................Internallylimited

Continuousoutputsinkcurrent(/FAULT,/STATUS).....................................................................25mA

Continuousoutputsourcecurrent(ILIM_LO,ILIM_HI)............................................internallylimited

ESD:HBMMode(Allpins) ........................................................................................................................2kV

CDMMode (Allpins).....................................................................................................................500V

HBM(USBconnectorpins:DP_IN,DM_IN,OUTtoGND)..............................................6kV

Recommended Operating Conditions

Symbol

Parameter

Min.

Typ.

Max.

Unit

VIN

Input Voltage, IN

4.5

-

5.5

V

Input Voltage, logic-level EN, CTL1, CTL2, CTL3, ILIM_SEL inputs

0

-

5.5

V

Input Voltage, data line inputs, DP_IN, DM_IN, DP_OUT, DM_OUT

0

-

VIN

V

VIH

High-level input voltage, EN, CTL1, CTL2, CTL3, ILIM_SEL

1.8

-

-

V

VIL

Low-level input voltage, EN, CTL1, CTL2, CTL3, ILIM_SEL

-

-

0.8

V

Continuous current data line inputs, SDP or CDP mode, DP_IN to DP_OUT or

DM_INtoDM_OUT

-

-

±30

mA

Continuous current data line inputs, BC1.2DCPmode,DP_INtoDM_IN

-

-

±15

mA

IOUT

Continuous output current, OUT

0

-

2.5

A

Continuous output sink current, /FAULT, /STATUS

0

-

10

mA

RILIM_XX

Current-limit set resistor

16.9

-

750

kΩ

TJ

Operating Virtual Junction Temperature Range

-40

-

125

ºC

Note:

Stresses greater than those listed under MAXIMUM

RATINGS may cause permanent damage to the device.

This is a stress rating only and functional operation of the

device at these or any other conditions above those

indicated in the operational sections of this specification

is not implied. Exposure to absolute maximum rating

conditions for extended periods may affect reliability.