For the most current data and application support visit www.artesyn.com/powergroup/products.htm

Notes

1

Natural convection cooling. Models NLP65-X629, NLP65-X608, NLP65-

X610 must not exceed 62.5 Watts continuous output power with natural

convection. Model NLP65-X620 not to exceed 65 Watts continuous output

power with natural convection. Model NLP65-763V3 must not exceed 33

Watts continuous output power.

2

When the input voltage is less than 90VAC the operating temperature

range is 0

met.

3

Peak output current lasting less than 60 seconds with duty cycle less than

5%. During peak loading, output voltage may exceed total regulation limits.

4

Figure is peak-to-peak for convection power rating. Output noise

measurements are made across a 20MHz bandwidth using a 6 inch twisted

pair, terminated with a 10µF electrolytic capacitor and a 0.1µF ceramic

capacitor.

5

Three orthogonal axes, random vibration 10 minutes for each axes, 2.4G

rms 5Hz to 500Hz.

6

A minimum load on the main output is required for proper start up. For

multiple outputs and single +5V output, the minimum load on the +5V is

0.2A. For single outputs greater than +5V the minimum load is 0.1A. To

maintain stated regulation then:

for single output units

I

≥ 0.2A

for multiple output units

0.25

≤ I(A)/I(B) ≤ 5, for I(A) ≥ 0.2A.

7

8

CAUTION: Allow a minimum of 1 second after disconnecting line power

when making thermal measurements.

N

9

This product is only for inclusion by professional installers within other

equipment and must not be operated as a stand alone product.

exceed 75 Watts with 20CFM forced air cooling.

standard EN55022 set-up with a stand alone NLP65 unit placed on a

grounded metal plate with a line choke on the AC input and ground wires

(i.e. the wires are looped through an EMI suppression toroid).

For system compliance it is usually necessary to install an ‘off-the-shelf’

AC inlet with an integral line filter in the system chassis or to install a line

choke on the input wires as close as possible to AC entry point of the

system chasssis. Please contact the applications group at Artesyn for

assistance with EMI compliance.

option. J2, L6 and JP10 are included. J2 is a safety agency approved

grounding pin, L6 is a ground choke and JP10 is a jumper. This option is

intended for use in non-metallic chassis applications where grounding is

not possible via the mounting screws. The ground choke is provided to

assist system EMC compliance. When performing conducted emissions

testing on stand alone units, the ‘G’ option is required to meet level B. To

order simply add the suffix ‘G’ to the standard model number, e.g. NLP65-

7608G, NLP65-9608G. This option is available for both the PFC and non-

PFC versions.

in the end use product.

enclosed version, see model numbering options below.

NLP65 Series

Single, dual and triple output

LOW TO MEDIUM POWER AC/DC POWER SUPPLIES

65-75W AC/DC Universal Input Switch Mode Power Supplies

2

www.artesyn.com

File Name: NLP65.PDF Rev: 15 Jan 2002

Model Numbering Options

1

The enclosure version includes: IEC connector, on/off switch, wire harness

output connector and fitted cover. To order, please add the suffix ‘E’ to the

end of the model number, e.g. NLP65-X608E. See NLP65 enclosure for

details.

2

A Safety earth ground pin and ground choke are available as an option.

To order, please add the suffix ‘G’ to the end of the model number, e.g.

NLP65-X608G.

3

To order a snap-on cover (unfitted), order the part number NLP65C.

4

To order a mounting bracket (unfitted), order the part number NLP65MB.

OUTPUT

OUTPUT CURRENT

TOTAL

NON-HARMONIC

HARMONIC

GROUND

VOLTAGE

CORRECTED

CORRECTED

7.5A

9.1A

8.0A

50mV

±2.0%

NLP65-7608

NLP65-9608

NLP65-X608G

2.5A

3.3A

3.0A

150mV

±5.0%

–12V

0.65A

0.81A

0.8A

120mV

±5.0%

7.5A

9.1A

8.0A

50mV

±2.0%

NLP65-7610

NLP65-9610

NLP65-X610G

2.2A

2.9A

2.5A

150mV

±5.0%

–15V

0.65A

0.85A

0.8A

150mV

±5.0%

7.0A

9.1A

8.0A

50mV

±2.0%

NLP65-7620

NLP65-9620

NLP65-X620G

2.0A

2.6A

2.0A

240mV

±5.0%

7.0A

9.1A

8.0A

50mV

±2.0%

NLP65-7629

NLP65-9629

NLP65-X629G

2.5A

3.3A

3.0A

150mV

±5.0%

+5V

10.0A

13.0A

12.0A

50mV

±2.0%

NLP65-7605

NLP65-9605

NLP65-X605G

+12V

5.4A

7.0A

6.5A

120mV

±2.0%

NLP65-7612

NLP65-9612

NLP65-X612G

+15V

4.4A

5.7A

5.3A

150mV

±2.0%

NLP65-7615

NLP65-9615

NLP65-X615G

+24V

2.7A

3.5A

3.5A

240mV

±2.0%

NLP65-7624

NLP65-9624

NLP65-X624G

International Safety Standard Approvals

VDE0805/EN60950/IEC950 File No. 10401-3336-1096

Licence No. 93678

UL1950 File No. E136005

CSA C22.2 No. 950 File No. LR41062C

Approval No. 606975