POWER SHELF

MAIN OUTPUT

N+1 REDUNDANT

HEIGHT

AFE1200 POWER

SIGNAL

POWER

POWER

SUPPLIES

INTERFACE

AFS2400-2U2P

2400W

1200W

2U (3.5 inch)

2

Parallel via 25 pin D

type connector

AFS4800-4U4P

4800W

3600W

4U (7.0 inch)

4

Parallel via 37 pin D

type connector

AFS2400 and AFS4800

Rack Mountable Power Shelves

[ 2 YEAR WARRANTY ]

• Front-end shelves for AFE1200 series power supplies

• Distributed power architecture

• UL and TUV approval

• Hot-swap power system

• N+1 redundancy

The AFS2400 and AFS4800 power shelves are designed to house Artesyn standard

AFE1200 series front-end power supplies. The shelves mount into standard 19 inch

racks. The power shelves accept full range (85 to 264VAC) AC power and deliver a

regulated DC bus voltage generated from the AFE1200 power supplies. The power

shelf provides input filtering and protection, and individual 20 Amp circuit breakers for

each AFE1200 power supply are provided on the front end of the shelf. An output bus

bar on the rear of the unit is provided for distribution of the main output to system

payload. Control, diagnostic and protection signals and the auxiliary output from

AFE1200 power supplies are routed through the power shelf to a parallel interface

connector on the rear of the unit. Clearance is provided on the rear of the unit to

maintain adequate airflow and cooling of the AFE1200 power supplies mounted within

the shelf.

PAGE 1

Nominal Input Voltage

Line Current (Typical)

85VAC

17.5A rms

120VAC

12.1A rms

220VAC

6.5A rms

240VAC

6.0A rms

AC Input Line Cord Current

(for each AFE1200 module within power shelf)

AFE1200 Output Configurations with AFS Power Shelves

AFS Power Shelf Characteristics

POWER MODULE

POWER SHELF

AFE1200-96S48NA

AFE1200-96S24NA

AFS2400-2U2P

48V @ 50A

24V @ 100A

12V @ 2A

AFS4800-4U4P

48V @ 100A

24V @ 200A

12V @ 4A