NB-4

NBC/NBM series

92

82

80

2.5

8

30.5

Mounting Plate

Terminal cover

2-Protection Earth

6-M4

2-f4.8

[0.19]

[3.15]

[3.62]

[0.1][1.2]

[0.31]

[3.23]

¶

Tolerance : ±1 [±0.04]

¶

Weight : 270g max

¶

Mounting Plate : Iron (surface finishing:nickel plating) t=1.0 [0.04]

¶

Case : PBT

¶

Dimensions in mm, [ ]=inches

¶

Terminal block screw tightening torque M4:1.6N-m (16.9kgf-cm) max

Output

Terminal

Input

Terminal

Output

Terminal

Mounting Hole

Input

Terminal

Terminal cover

¶

Closed the terminal cover

±0.5

Name Plate

This product is shipped in the following condition, because it is equipped with push-down terminals.

1

The terminal cover is retracted inside the unit.

2

The screws for connecting the terminals are held in the up right position.

¡Note when installing the EMI/EMC

Filter on a DIN rail.

When the EMI/EMC Filter is grounded through

the DIN rail, the proper noise attenuation may not

be achieved.

Be sure to connect the protection earth (PE) of

the EMI/EMC Filter body to the earth.

At least one PE connection is required.

92

80

30.5

2.5

8

8.2 ±1.5

6-M4

Name Plate

Output

Terminal

Output

Terminal

¶

Tolerance : ±1 [±0.04]

¶

Weight : 270g max

¶

Mounting Plate : Iron (surface finishing:nickel plating) t=1.0 [0.04]

¶

Case : PBT

¶

Dimensions in mm, [ ]=inches

¶

Terminal block screw tightening torque M4:1.6N-m (16.9kgf-cm) max

2-Protection Earth

Mounting Plate

Terminal cover

DIN rail

Input

Terminal

Input

Terminal

Terminal cover

¶

Closed the terminal cover

[3.15]

[3.62]

[0.32]

[0.1][1.2]

[0.31]

Standard Type

DIN rail installation Type

DIN rail

Name Plate

External view

July 21, 2022