Datasheet © Artesyn Technologies® 2005

The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising

from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent

accompany the sale of any such product(s) or information contained herein.

www.artesyn.com

File Name: nfs80.pdf Rev (02): 08 Nov 2005

M

Me

ec

ch

ha

an

niic

ca

all N

No

otte

es

s

A

Either metallic or non-metallic stand-offs can be used in all four mounting

holes without affecting safety approval. The diameter of metal stand-offs, if

used, must not exceed 0.212 inches (5.4 mm).

B

It is always advisable to attach the power supply heat sink to another

thermal dissipator (such as a chassis, a finned heat sink, etc.) The resulting

temperature decrease of heat sink-mounted components will improve

power supply lifetime.

mechanically connected to the system chassis. Alternatively, the ground

pad encircling the mounting hole near J1, allows system grounding through

a metal stand-off to the system chassis.

and may be additionally supported by the heat sink mounting holes.

E

A standard L-bracket and cover is available for mounting which contains all

screws, connectors and mounting hardware. Two different kits are

available, order part number ‘NFS110 COVER KIT’ or ‘NFS110C’.

LOW TO MEDIUM POWER AC/DC POWER SUPPLIES

80-110 W AC-DC Universal Input Switch Mode Power Supplies

3

NFS80 Series

Quad output

ALL DIMENSIONS IN INCHES (mm)

C

6-32 UNC

(4 Places)

Pin 1

1.00

±0.005

(25.4)

Voltage Adjust

J2

J1

F1

L1

C6

Pin 1

0.156 (3.962)

Dia. Hole

(4 Places)

5A, 250 VAC

0.475

±0.010

(12.07)

1.55

±0.005

(39.37)

3.35

±0.015 (85.09)

1.80 (45.72)

Max.

0.050

±0.020

(1.27)

4.250

±0.020

(107.95)

3.750

±0.005

(95.25)

0.250

±0.010

(6.35)

0.250

±0.010

(6.35)

6.50

±0.005 (165.1)

7.00

±0.020 (177.8)

T1

AC (J1) connector

Molex 09-50-3051 (with second and fourth pins removed) or Molex 09-91-

0500 mating connector with 2478 or equivalent crimp terminals.

DC (J2) connector

Molex 09-50-3131 or Molex 09-91-1300 mating connector with 2478 or

equivalent crimp terminals.

PIN CONNECTIONS

J1

NFS80-7602J

NFS80-7606J

Pin 1

AC Ground

AC Ground

Pin 2

AC Neutral

AC Neutal

Pin 3

AC Line

AC Line

J2

NFS80-7602J

NFS80-7606J

Pin 1

+5 V

+5 V

Pin 2

+5 V

+5 V

Pin 3

+5 V

+5 V

Pin 4

Return

Return

Pin 5

Return

Return

Pin 6

Return

Return

Pin 7

Return

Return

Pin 8

+12 V

+15 V

Pin 9

+12 V

+15 V

-12 V Return

-15 V Return

-12 V

-15 V

Pin 12

Removed for Key

Removed for Key

Pin 13

+24 V

+24 V