SIL40C datasheet(2/3 Pages) ARTESYN

2 / 3 page

For the most current data and application support visit www.artesyn.com/powergroup/products.htm

SIL40C Series

12 Vin single output

DC-DC CONVERTERS

C Class Non-isolated

NEW Product

File Name: sil40c.pdf Rev (04): 16 Dec 2005

otte

Measured as per recommended set-up. 2 x Cin = 270 µF (20 m

Ω

esr max, 3 x Cout = 680 µF (10 m

Ω esr max).

di/dt = 10 A/µs, Vin = Nom, Tc = 25 °C, load change = 0.50 lo max.

to 0.75 lo max. and 0.75 lo max. to 0.50 lo max.

External input fusing is recommended.

Measured with external filter. See Application Note 132 for details.

Uses external resistor from trim pin to output ground. See

Application Note 132 for details.

Signal line assumed <3 m in length

This product is only for inclusion by professional installers within

other equipment and must not be operated as a stand alone

product.

The standard unit with the suffix '-V' is for vertical mounting. To

order a unit with horizontal mounting, please add the suffix '-H' to

the model number, e.g. SIL40C-12SADJ-HJ.

Power-up is the time from application of dc input to Power Good

enabled. Remote ON/OFF is from ON/OFF asserted high to power

good enabled.

10 See Application Note 132 for operation above 50 ºC.

11 See Application Note 132 for ripple current requirements.

12 These models have a wide trim output. The unit has an output of

0.9 Vdc to 5 Vdc. An external resistor adjusts the output voltage.

13 To order a unit with a pin length of 0.150”, please add suffix ‘P4’ to

the model number, e.g. SIL40C-12SADJ-HP4J.

14 TSE RoHS 5/6 (non Pb-free) compliant versions may be available on

special request, please contact your local sales representative for

details.

15 NOTICE: Some models do not support all options. Please contact

your local Artesyn representative or use the on-line model number

search tool at http://www.artesyn.com/powergroup/products.htm to

find a suitable alternative.

OUTPUT

INPUT

OVP

OUTPUT

EFFICIENCY

REGULATION

MODEL

POWER

VOLTAGE

(12)

CURRENT

LINE

LOAD

NUMBER

(8,13,14,15)

(MAX.)

(MIN.)

(MAX.)

200 W

10.2-13.8 Vdc

N/A

0.9-5.0 Vdc

0 A

40 A

92%

±0.2%

±1.5%

SIL40C-12SADJ-VJ

Part Number System with Options

Rated Output Current

40 = 40 Amps

Number of Outputs

SADJ = Single Adjustable Output

Product Family

SIL = Single in Line

Performance

C = Cost Optimized

Input Voltage

12 = 10.2 Vdc to 13.8 Vdc

Mounting Option

V = Vertical Mount

H = Horizontal Mount

Packaging Options

J = Pb-free (RoHS 6/6 compliant) (14)

The ultra-wide output voltage trim range offers major advantages to users who

select the SIL40C-12SADJ series. It is no longer necessary to purchase a

variety of modules in order to cover different output voltages. The output

voltage can be trimmed in a range of 0.9 Vdc to 5.0 Vdc When the SIL40C-

12SADJ series converter leaves the factory the output has been adjusted to

the default voltage of 0.9 V

uttp

utt V

olltta

e A

djju

sttm

ntt o

off tth

e S

SIIL

C--1

J S

erriie

SIL40C 数据表(PDF) 2 Page - Artesyn Technologies

SIL40C 数据表(HTML) 2 Page - Artesyn Technologies

Html Pages

1 2 3

数据表下载