B3JB00000219 datasheet(10/67 Pages) PANASONIC

10 / 67 page

TH-32A400H TH-32A410H

5.1.5.

Display of SOS History

SOS History (Number of LED blinking) indication.

From left side; Last SOS, before Last, three occurrence before, 2nd occurrence after shipment, 1st occurrence after shipment.

This indication except 2nd and 1st occurrence after shipment will be cleared by [Self-check indication and forced to factory

shipment setting].

5.1.6.

Exit

1. Disconnect the AC cord from wall outlet.

5.1.7.

Hotel Mode

1. Purpose

Restrict a function for hotels.

2. Access command to the Hotel mode setup menu.

In order to display the Hotel mode setup menu:

While pressing [VOLUME (-)] button of the main unit,

press [AV] button of the remote control three times within

2 seconds.

Then, the Hotel mode setup menu is displayed.

3. To exit the Hotel mode setup menu

Disconnect AC power cord from wall outlet.

4. Explain the Hotel mode setup menu

Item

Function

Hotel Mode

Select hotel mode On/Off

Initial INPUT

Select input signal modes.

Set the input, when each time power is switched on.

Selection :

Off,Analogue,DVB-C,DVB-T,AV1,AV2,HDMI1,

HDMI2

• Off: give priority to a last memory. However, Euro

model is compulsorily set to TV.

Initial POS

Select programme number.

Selection :

Off/0 to 99

• Off: give priority to a last memory.

Initial VOL LEVEL

Adjust the volume when each time power is switched

on.

Selection Range :

Off/0 to 100

• Off: give priority to a last memory.

Maximum Vol Level Adjust maximum volume.

Range :

0 to 100

Button Lock

Select local key conditions.

Selection :

Off/SETUP/MENU/ALL

• OFF: altogether valid

• SETUP: only F-key is invalid

(Tuning guide (menu) can not be selected.)

• MENU: only F-key is invalid

(only Volume/Mute can be selected.)

• ALL: altogether invalid.

Remote Lock

Select remote control key conditions.

Selection :

Off/SETUP/MENU

• OFF: altogether valid.

• SETUP: only Setup menu is invalid.

• MENU: Picture/Sound/Setup menu are invalid.

Hotel Mode USB

Basically after user already setup the hotel mode

according to their criteria, what they need to do is

• insert USB (while in hotel mode)

• choose ‘Copy TV to USB’ to copy the setting into

the USB (a file will be created to store the hotel

mode setting in the USB)

• switch ‘OFF’ the unit

• pull out USB from unit

To copy the hotel mode setting from USB.

• enter hotel mode

• insert USB

• choose ‘Copy USB to TV’

• follow instruction as shown on the units

• once finish, switch ‘OFF; the unit

• pull out USB from unit

Private Information Select private information for VIERA Cast is Keep or

Reset if Hotel mode is set to [On] when TV power on

Selection :

Keep/Reset

• Keep: private information for VIERA Cast is keep

• Reset: private information for VIERA Cast is

reset

B3JB00000219 数据表(PDF) 10 Page - Panasonic Semiconductor

B3JB00000219 数据表(HTML) 10 Page - Panasonic Semiconductor

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67

数据表下载

链接网址

B3JB00000219 数据表(PDF) 10 Page - Panasonic Semiconductor

B3JB00000219 数据表(HTML) 10 Page - Panasonic Semiconductor

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67

数据表 下载

链接网址

数据表下载