| 数据搜索系统,热门电子元器件搜索 |
|
HC805P18GRS/D 数据表(PDF) 32 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
HC805P18GRS/D 数据表(HTML) 32 Page - NXP Semiconductors |
|
32 / 111 page ![]() GENERAL RELEASE SPECIFICATION INTERRUPTS Rev. 1.0 8 2 3 4 5 6 7 8 9 10 11 12 13 14 A 16 17 18 19 20 Any enabled IRQ interrupt source sets the IRQ latch on the falling edge of the IRQ pin or a port A pin if port A interrupts have been enabled. If edge-only sensitivity is chosen by a mask option, only the IRQ latch output can activate a request to the CPU to generate the IRQ interrupt sequence. This makes the IRQ interrupt sensitive to the following cases: 1. Falling edge on the IRQ pin with all enabled port A interrupt pins at a high level. 2. Falling edge on any enabled port A interrupt pin with all other enabled port A interrupt pins and the IRQ pin at a high level. If level sensitivity is chosen, the active high state of the IRQ input can also activate an IRQ request to the CPU to generate the IRQ interrupt sequence. This makes the IRQ interrupt sensitive to the following cases: 1. Low level on the IRQ pin 2. Falling edge on the IRQ pin with all enabled port A interrupt pins at a high level 3. Low level on any enabled port A interrupt pin 4. Falling edge on any enabled port A interrupt pin with all enabled port A interrupt pins and the IRQ pin at a high level This interrupt is serviced by the interrupt service routine located at the address specified by the contents of $3FFA and $3FFB. The IRQ latch is automatically cleared by entering the interrupt service routine. Optional External Interrupts (PA0–PA7) The IRQ interrupt can be triggered by the inputs on the PA0 through PA7 port pins if enabled by individual mask options. With pullup enabled, each port A pin can activate the IRQ interrupt function and the interrupt operation will be the same as for inputs to the IRQ pin. Once enabled by mask option, each individual port A pin can be disabled as an interrupt source if its corresponding DDR bit is configured for output mode. NOTE The BIH and BIL instructions apply to the output of the logic OR function of the enabled PA0 through PA7 interrupt pins and the IRQ pin. The BIH and BIL instructions do not test only the state of the IRQ pin. Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |