- 82 -

All Data Subject To Change Without Notice

www.andersonpower.com

“T” Handle *

The “T” handle makes mating and unmating the connector easier. The

non-conductive red plastic material is strong and safe. (2) Self tapping

screws are used to secure the handle to the connector housing.

Description

Part Numbers

Minimum Quantity

1,000

50

Red “T” Handle + Hardware Bag

-

SB50-HDL-RED

Hardware Bag (2 Screws)

-

104G17

Red “T” Handle Only

113899P1

-

#8 x 5/8” Screw (Order 2 Per Handle) H1120P55

-

* Torque value 12 (in - lbs) / 1.4 (Nm)

“A” frame handle for SB® 50 *

Handle makes mating and unmating the connector easier.

The non-conductive gray plastic material is strong and safe.

Machine screws and locknuts included.

Description

Part Number

Minimum Quantity

200

Gray “A” Handle & Hardware

997G1

* Torque value 12 (in - lbs) / 1.4 (Nm)

Dust Cover

Prevents dust and dirt from entering the mating interface of

the connector when unmated.

NOTE: Not a Hermetic Seal.

Description

Part Numbers

Minimum Quantity

500

50

Dust Cover with Lanyard Strap, Red

113890P1 134G1

SB® Accessories

(2) Self-tapping

Screws

Handle

Connector

Housing

Screws

Handle

Connector

Housing not

Included

Locknuts

Slide cover over

mating end.

Housing not included.

ATTRIBUTES

SB® 50

AMP Rating AC/DC

50

Voltage Rating AC/DC (Steady State)

250

Breaking Capacity -

AMP Rating / Cycles

50 / 10 Cycles

Voltage Rating (Breaking Capacity)

220 VDC

Finger Safety - Mated Only

IEC 60529 - IP20

Wire Size Tested

16 mm²

Contact Series Tested

5900/1307

Climatic Testing (Cold, Heat & MFG)

IEC 60512 Test-11j, 11i & 11g

Cycle Life

IEC 60512 Test 9a - 5,000 Cycles

Mechanical Strength Impact

IEC 60512-5 @ 29.5 Inches- Dropped 8 times

Temperature Range

-20°C to 105°C

-4°F to 221°F

PROTECTION

Touch Safety with Wire Contacts &

PCB Mating Interface

IEC 60529

IP10 unmated

Environmental Sealing with Boots

IEC 60529

IP64

Connector

Series

Configurations

Creepage /

Clearance

per IEC

60950-1

Material

Group

SB® 50

Unmated

2.99 mm

IIIa

Mated

2.99 mm

IEC INFORMATION