| 数据搜索系统,热门电子元器件搜索 |
|
UCS3205 数据表(PDF) 17 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
UCS3205 数据表(HTML) 17 Page - Microchip Technology |
|
17 / 30 page ![]() 2020 Microchip Technology Inc. DS20006433A-page 17 UCS3205 4.9 Fast Role Swap (FRS) The Fast Role Swap circuit enables the application to change the role of sinking current to sourcing current within the allowed time defined by the USB Power Delivery Specification. The FRS circuit is pre-enabled when the FRS pin is pulled high for the duration of tFRS_PREARM and remains in this Ready state as long as the FRS pin remains high. All Fault protections remain active, but the FAULT# pin and associated Fault Handling states are not asserted unless EN = 1. Pre-enabling the FRS is valid only in a Reset state (EN = 0). A low-to-high FRS transition received while EN = 1 will not affect operation. If FRS = 1 and in a Reset state (EN = 0), the UCS3205 will then monitor the EN pin for a low-to-high transition. A low-to-high transition on EN will fully enable the FRS circuit and the switch will be turned on in tFRS_SWAP after VOUT drops below VIN. When tFRS_SWAP elapses, the application’s VOUT voltage will be above 90% of the VIN voltage. Any high-to-low transitions on the FRS pin are ignored during FRS conditions. A high-to-low transition on EN will turn off the switch and exit FRS. See Figure 4-2, Figure 4-3, and Figure 4-4. FIGURE 4-2: Fast Role Swap – Nominal Operation. FIGURE 4-3: Fast Role Swap – FRS Circuitry Remains Awake. T = 200 μs FRS FRS pulled high to wake up UCS3205 Milliseconds, hours or days elapsed FRS transi on Controller pulls FRS low with EN to get low-IQ or to allow next start-up to be normal (non- FRS) EN PD controller detects FRS request and arms UCS3205 T < 150 μs is possible for fast falling VOUT FRS = 0 has no once the switch is on T = 200 μs FRS FRS pulled high to wake up UCS3205 Milliseconds, hours or days elapsed FRS transi on EN PD controller detects FRS request and arms UCS3205 T << 150 μs total UCS3205 will enter Reset state but internal analog circuitry will stay (woken up) and ready for next FRS request. No BVD Fault response (anyway, switch is ) |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |