113730

© NXP B.V. 2007. All rights reserved.

Product data sheet

Rev. 3.0 — 14 March 2007

8 of 33

NXP Semiconductors

SL2 ICS53/SL2 ICS54

I•CODE SLI-S/I•CODE SLI-S HC

PUBLIC

7.2.1 Unique Identifier

The 64-bit unique identifier (UID) is programmed during the production process according

to ISO/IEC 15693-3 and cannot be changed afterwards.

The numbering of the 64 bits is done according to ISO/IEC 15693-3 starting with the

LSB 1 and ending with the MSB 64. This is in contrast to the general used bit numbering

within a byte (starting with LSB 0).

The TAG type is a part of the UID (bit 41 to 48, after the manufacturer code which is “04h”

for NXP Semiconductors).

The TAG type of the SL2 ICS53/SL2 ICS54 is “02h”

Table 4.

Unique Identifier description

Byte

7

6

5

4

3

2

1

0

Name

UID 7

UID 6

UID 5

UID 4

UID 3

UID 2

UID 1

UID 0

Value

E0

04

02

IC manufacturer serial number

Bit

64 to 57

56 to 49

48 to 41

40 to 1

MSB

LSB

7.2.2 Configuration of delivered ICs

I•CODE SLI-S/I•CODE SLI-S HC ICs are delivered with the following configuration by

NXP Semiconductors:

• Unique Identifier is unique and read only

• Write Access Conditions allow to change user blocks, AFI, DSFID, EAS and

Passwords

• All password bytes are 00h (Protection Password, Privacy Password, Destroy

Password, EAS Password)

• User Data memory is not password protected

• Password protected Privacy Mode is disabled

• EAS password protection is disabled

• Status of EAS mode is not defined

• AFI is supported and not defined

• DSFID is supported and not defined

• EPC Memory is not defined and can be written once

• User Data memory is not defined