HCS138MS

FN2473 Rev 3.01

Page 3 of 10

Feb 24, 2022

Absolute Maximum Ratings

Reliability Information

Supply Voltage (VCC) . . . . . . . . . . . . . . . . . . . . . . . . -0.5V to +7.0V

Input Voltage Range, All Inputs . . . . . . . . . . . . . -0.5V to VCC +0.5V

DC Input Current, Any One Input

10mA

DC Drain Current, Any One Output

25mA

(All Voltage Reference to the VSS Terminal)

Storage Temperature Range (TSTG). . . . . . . . . . . -65oC to +150oC

Lead Temperature (Soldering 10sec). . . . . . . . . . . . . . . . . . .+265oC

Junction Temperature (TJ) . . . . . . . . . . . . . . . . . . . . . . . . . . .+175oC

ESD Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 1

Thermal Resistance

JA

JC

SBDIP Package . . . . . . . . . . . . . . . . . . . .

73oC/W

24oC/W

Ceramic Flatpack Package . . . . . . . . . . .

114oC/W

29oC/W

Maximum Package Power Dissipation at +125oC Ambient

SBDIP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.68W

Ceramic Flatpack Package . . . . . . . . . . . . . . . . . . . . . . . . .0.44W

If device power exceeds package dissipation capability, provide heat

sinking or derate linearly at the following rate:

SBDIP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13.7mW/oC

Ceramic Flatpack Package . . . . . . . . . . . . . . . . . . . . . .8.8mW/oC

CAUTION: As with all semiconductors, stress listed under “Absolute Maximum Ratings” may be applied to devices (one at a time) without resulting in permanent dam-

age. This is a stress rating only. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. The conditions listed under “Electri-

cal Performance Characteristics” are the only conditions recommended for satisfactory device operation..

Operating Conditions

Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +4.5V to +5.5V

Input Rise and Fall Times at VCC = 4.5V (TR, TF) . . . . . 500ns Max

Operating Temperature Range (TA). . . . . . . . . . . . -55oC to +125oC

Input Low Voltage (VIL) . . . . . . . . . . . . . . . . . . . 0.0V to 30% of VCC

Input High Voltage (VIH) . . . . . . . . . . . . . . . . . .70% of VCC to VCC

TABLE 1. DC ELECTRICAL PERFORMANCE CHARACTERISTICS

PARAMETER

SYMBOL

(NOTE 1)

CONDITIONS

GROUP A

SUBGRO

UPS

TEMPERATURE

LIMITS

UNITS

MIN

MAX

Quiescent Current

ICC

VCC = 5.5V,

VIN = VCC or GND

1+25oC-

40

µA

2, 3

+125oC, -55oC

-

750

µA

Output Current (Sink)

IOL

VCC = 4.5V, VIH = 4.5V,

VOUT = 0.4V, VIL = 0V

1+25oC7.2

-

mA

2, 3

+125oC, -55oC6.0

-

mA

Output Current

(Source)

IOH

VCC = 4.5V, VIH = 4.5V,

VOUT = VCC -0.4V,

VIL = 0V

1+25oC-7.2

-

mA

2, 3

+125oC, -55oC-6.0

-

mA

Output Voltage Low

VOL

VCC = 4.5V, VIH = 3.15V,

IOL = 50

A, VIL = 1.35V

1, 2, 3

+25oC, +125oC, -55oC-

0.1

V

VCC = 5.5V, VIH = 3.85V,

IOL = 50

A, VIL = 1.65V

1, 2, 3

+25oC, +125oC, -55oC-

0.1

V

Output Voltage High

VOH

VCC = 4.5V, VIH = 3.15V,

IOH = -50

A, VIL = 1.35V

1, 2, 3

+25oC, +125oC, -55oCVCC

-0.1

-V

VCC = 5.5V, VIH = 3.85V,

IOH = -50

A, VIL = 1.65V

1, 2, 3

+25oC, +125oC, -55oCVCC

-0.1

-V

Input Leakage

Current

IIN

VCC = 5.5V, VIN = VCC or

GND

1+25oC-

0.5

µA

2, 3

+125oC, -55oC-

5.0

µA

Noise Immunity

Functional Test

FN

VCC = 4.5V,

VIH = 0.70(VCC),

VIL = 0.30(VCC) (Note 2)

7, 8A, 8B

+25oC, +125oC, -55oC

---

NOTES:

1. All voltages reference to device GND.

2. For functional tests VO

4.0V is recognized as a logic “1”, and VO 0.5V is recognized as a logic “0”.