VT5363

LED selection

19/25

5

LED selection

5.1

Overview

There are a number of LEDs from a range of suppliers which will work well with the VT5363.

It is the responsibility of the customer to ensure that the chosen LED works in their specific

implementation. There are various price/performance trade-offs which may be made if the

customer chooses to do so.

5.2

Key LED parameters

The VT5363 system requires a bright visible RED LED in a standard 5mm (T1 3/4) package.

current of 20 mA. The key LED parameters are listed in

Table 5.

5.3

VCSEL and IR illumination

The VT5363 sensor will operate over a wide range of illuminant wavelengths. For devices

operating at approx 850 nm (IR LED or VCSEL), the on-die automatic exposure controller

(AEC) will compensate for the change in sensitivity compared to 640nm (red LED).

Navigation performance may be improved by increasing the illuminated device drive.

Table 5.

Key LED parameters

Parameter

Recommended Value

Notes

Diameter

5mm

Important for fit with lens

Length

8.6mm

Important for fit with lens

Material

AlInGaP

For long-term reliability

Luminous Intensity (@20mA)

900mcd

Minimum value

Viewing Angle

Half intensity

Mechanical accuracy

Accuracy of the die positioning

within the LED body

Colour

Red

Wavelength

640nm +/- 50nm