CGE

2

Dimensions are mm (inches)

Subject to changes

Contents

Introduction .......................................... 2

Connector Design .............................. 2

How to order ....................................... 3

Mateability ......................................... 3

Polarization ........................................... 3

Technical Data ...................................... 4

Panel Cut-Outs ..................................... 5

Connector Dimensions .......................... 6

Accessories ........................................... 9

Contacts and Tools ............................... 10

Product Safety Information .................. 11

Introduction

The Cannon CGE connectors are designed

to transmit very high current at low

voltage, as for example in the electrical

equipment of military land- and sea-borne

vehicles and in industrial applications. The

connectors meet the mating dimensions,

mechanical features and rear panel

installation requirements of VG 95234.

Ultraflexible shielded welding cables acc

to MTV 6145-005 are terminated to the

connectors.

Connector Design

The high power connectors CGE feature

one contact in a two-piece rigid insulator.

The aluminum shell has a chromate finish

over cadmium. The operating temperature

ranges from –55 to 125

°C.

The contacts made of copper or a copper

alloy with hard silver finish are designed

for crimping or termination to solid copper

conductors with threaded bolts. The

mechanical durability is a minimum of 500

mating cycles. The crimp contacts accept

wires according to DIN 46438 (25 – 240

two-piece insulator which is fixed to the

shell with a snap-in ring. This allows

unlimited exchange of the crimp contacts.

The bayonet coupling assures fast and

reliable mating and unmating. Audible

snap-in and colour-coded snap-in points

indicate positive mating. Plugs and

receptacles are waterproof in mated

condition up to 1 bar (35 feet of water).

O-Ring

Shell

Insulator

Cylindrical

O-Ring

Insulator

Spring ring

Contact

Contact

Contact

front side

rear side

Spring ring

Insulator

O-Ring

Spring

Insulator

Barrel assembly

Contact

contact

Contact

rear side

front side

Connector Design