Technical Datasheet

Bertech® makes no warranty, representation, or guarantee regarding the information contained herein or the suitability of its this product

for any particular purpose, nor does Bertech® assume any liability whatsoever arising out of the application or use of this product. It is

ultimately the responsibility of the customer to determine a product’s suitability for a particular application.

Low Static Kapton Tape

RoHS Compliant

KPTLS Series

Low Static Kapton

® Tapes are made of 1 mil thick polyimide film backed by 1.5 mil silicone

adhesive with electro-static dissipative (ESD) properties to reduce the static charge. The silicone

adhesive leaves no residue. They can withstand temperatures of up to 260 degrees C (500 degrees F).

Color is amber and available in 36-yard rolls.

Features:

• Thin and conformable enabling masking of uneven surfaces

• Wide operating temperature range from -100°F to 500°F

• Removes cleanly without adhesive residue after exposure to heat

• High performance silicone adhesive

• High strength backing provides superior resistance to puncture and tear

• Designed to minimize the effect of static during stripping and peeling

APPLICATIONS: 3D Printing, Aerospace Assembly, Automotive Facilities, Electronic Assembly, Fiber

Optics Manufacturing, and Solar Panels

TYPICAL PHYSICAL PROPERTIES

(1)

Color

Amber

Adhesion Type

Silicone

Film Thickness

1 Mil

Adhesive Thickness

1.5 Mil

Adhesion to Steel

25 Oz./in.

Total Thickness

2.5 Mil

Tensile Strength

30 lbs./in.

Elongation

55 %

Dielectric Strength

7000 volts

Operating Temperature

-73 °C (-100°F) to 260°C (500°F)

Resistance to acids, oils, solvents

Excellent

Static Charge: (Measured at 50% RH,

70°F in an ESD controlled environment)

Removal from roll: <150 volts

Removal from PWB: <50 volts

Length

36 yards

Kapton® is a trademark of Dupont

(1) Specifications are subject to change at any time. If you have any questions, please contact us for the latest update.